Tuesday, 6 March 2018

Sistema de negociação de planilha


Excel Spreadsheets.


Abaixo estão os arquivos de planilha que devem ser compatíveis com Excel 97 e versões superiores.


O cenário pára a maneira bayesiana, junho de 2013.


Folha de cálculo usada para demonstrar como os níveis de parada funcionam e quanto o risco de várias regras de decisão o deixa levar como referenciado na história de junho de 2013 por Burton Rothberg.


A zona de conforto de colocar e chamar, maio de 2009.


Essas planilhas incluem os modelos de preços LLP referenciados na história de Techniques de negociação de maio de 2009 por Paul Cretien.


Construindo um estrangulamento melhor, março de 2009.


Essas planilhas incluem os modelos referenciados na história de Techniques de Negociação de março de 2009 por Paul Cretien. Eles também devem ser usados ​​no lugar das planilhas de trabalho anteriormente associadas às histórias da Cretian's Trading Techniques.


Calibração de estratégias de lucros e perdas, fevereiro de 2009.


Esta planilha inclui os modelos referenciados na história das técnicas de negociação de 2009 de Michael Gutmann.


Comparando modelos de preços de opções.


Essas planilhas incluem os modelos referenciados na história de Techniques de negociação de junho de 2008 por Paul Cretien. Eles também devem ser usados ​​no lugar de folhas de trabalho anteriormente associadas à história de Cretis em setembro de 2006 Trading Techniques.


Comparando modelos de preços de opções.


Essas planilhas incluem os modelos referenciados na história de técnicas de negociação de setembro de 2006 por Paul Cretien.


Padrões de desempenho padrão.


Essas planilhas incluem mais das estatísticas de desempenho citadas neste artigo sobre o comércio sistemático baseado em padrões. Artigo de referência: "Padrões de negociação na areia", novembro de 2004.


Resumo de desempenho I.


Primeira planilha que mostra o resumo de desempenho completo discutido no artigo. Artigo de referência: "Reversões de lucros em ações e títulos", fevereiro de 2004.


Resumo do desempenho II.


Segunda planilha que mostra o resumo de desempenho completo discutido no artigo. Artigo de referência: "Reversões de lucros em ações e títulos", fevereiro de 2004.


Planilha de preços de opções.


Esta planilha incluiu folhas de cálculo para cada uma das opções nuas e a chamada coberta. Artigo de referência: "Abrangendo as opções", março de 2003.


Planilha de preços de opções.


Esta planilha usa o modelo Black-Scholes para fornecer preços teóricos para opções de colocação e chamada. Artigo de referência: "Novas opções no aumento do seu patrimônio", outubro de 2002.


Tabela de correspondência.


Toda a matriz de correlação que retrata as relações de retorno entre as ações de mesmo e do setor cruzado. Artigo de referência: "Dois podem ser melhores do que um", setembro de 2002.


Calculadora de vantagens matemáticas.


Folha de cálculo para calcular os resultados esperados, vantagem matemática e retorno anual para troca de opções, tendo em vista os pressupostos de entrada. Artigo de referência: "Determinando os resultados esperados de uma troca de opções", agosto de 2002.


Calculadora do estado do mercado.


Folha de cálculo para determinar o "estado" do mercado, conforme definido em "Ouvir os mercados, nota por nota", julho de 2002.


Calculadora de raias.


Folha de cálculo para análise de preços "streaks", como explicado em "Streaking prices" pode ser revelador, abril de 2002.


Calculadora Fibonacci.


Uma ferramenta para aplicar a análise Fibonacci tanto para futuros quanto para ações. Artigo de referência: "Trading with Fibonacci retracements", fevereiro de 2002.


Ferramenta de retração.


Esta planilha executa automaticamente os cálculos de retracement descritos em "The Elliott-Fibonacci connection", outubro de 2001.


Aplicação de gerenciamento de dinheiro.


Esta planilha implementa a técnica de gerenciamento de dinheiro discutida em "3x1 = Mais do que você pensa", dezembro de 1999.


Tabela de classificação de software.


Uma planilha que permite aos usuários criar classificações personalizadas do software de negociação revisado em "Day-trading software shootout", Special Issue 1999.


Calculadora de força de mercado.


Folha de cálculo mostrando técnicas para jogar tanto a longo prazo quanto a curto prazo. Artigo de referência: "Skimming the trend", fevereiro de 1999.


Ferramenta de medidas repetidas.


Folha de cálculo aplicando análises de medidas repetidas detalhadas em "Fora da amostra, fora de contato", janeiro de 1999.


Dados corrigidos de proporções, gráficos.


Essas planilhas incluem os gráficos e os dados usados ​​para este artigo na avaliação de sistemas que utilizam dados ajustados em razão. Artigo de referência: "A verdade seja dita", janeiro de 1999.


Exemplo de Datamining.


Esta planilha inclui os gráficos e os dados utilizados para "Trabalhar em uma mina de carvão", janeiro de 1999, bem como dados adicionais fora da amostra não mostrados no artigo.


Calculadoras de tamanho de negociação.


Cálculos para o escore z, correlação e métodos f óptimos de gerenciamento de dinheiro, conforme descrito em "Pontuação alta e baixa", abril de 1998.


Folha de cálculo da banda Bollinger.


Folha de cálculo que calcula bandas de Bollinger. Artigo de referência: "As bandas de Bollinger são mais do que os olhos", novembro de 1997.


Monitorador MACD crossover.


Folha de cálculo que calcula o preço para o futuro que faria com que o MACD cruzasse amanhã. Artigo de referência: "Sinal do crossover", outubro de 1997.


Monitorador de crossover EMA.


Folha de cálculo que calcula o preço para o futuro que causaria uma média móvel exponencial de nove períodos e uma EMA de 18 períodos para atravessar amanhã. Artigo de referência: "Operador suave", setembro de 1997.


Calculadora RSI.


Folha de cálculo que calcula o oscilador de força relativa. Artigo de referência: "Construindo uma melhor armadilha de velocidade", maio de 1997.


Calculadora estocástica.


Folha de cálculo que calcula o oscilador estocástico. Artigo de referência: "Construindo uma melhor armadilha de velocidade", maio de 1997.


Calculadora Williams% R.


Folha de cálculo que calcula o oscilador Williams% R. Artigo de referência: "Construindo uma melhor armadilha de velocidade", maio de 1997.


Calculadora Momentum.


Folha de cálculo que calcula o oscilador de momentum. Artigo de referência: "Uma arma de radar com preço", abril de 1997.


Calculadora de taxa de troca.


Folha de cálculo que calcula o oscilador da taxa de troca. Artigo de referência: "Uma arma de radar com preço", abril de 1997.


Calculadora MACD.


Folha de cálculo que calcula o oscilador de convergência-divergência da média móvel. Artigo de referência: "Uma arma de radar com preço", abril de 1997.


LIVRE folha de cálculo para log de negociação!


LIVRE folha de cálculo para log de negociação!


Esta é uma discussão sobre a planilha GRATUITA para log de negociação! dentro dos fóruns de Software de Negociação, parte da categoria Comercial; Ok, eu finalmente completei minha planilha eletrônica e tomei o tempo para verificar os cálculos à mão, então eu sei.


linha 1: negociação de papéis de ações.


linha 2: símbolo do ticker.


linha 2: longa ou curta.


linha 2: preço de entrada.


linha 2: preço de saída.


linha 2: N de ações.


linha 2: Lucro ou perda.


(isto é uma comissão de ida e volta de $ 25, você pode clicar duas vezes para alterar o valor)


linha 2: custo total.


linha 2:% de vitória ou perda.


linha 2: lucro ou perda total.


(na realidade, os cálculos de% de ganho nos vencedores, etc., são feitos com os resultados excluindo o custo das comissões)


Paradas são 4 ônibus.


Eu gosto de dividir a minha posição em 3 porções, e tirar proveito em 25, 75 pips e, em seguida, rastrear o lote final com 75 pips à direita. você pode projetar uma planilha para mim?


Day Trading & # 8216; Expectativa & # 8217; Simulação.


'Monte Carlo & amp; Mersenne Twister '


Simuladores de Negociação.


Simulador de negociação.


Veja outra planilha de negociação gratuita que você pode achar útil;


Um "Monte Carlo Expectancy Simulator". Vários anos atrás, tropecei por um simples "Excel Monte Carlo Trading Simulator" em um fórum de negociação. Eu decidi criar minha própria versão, que estava um pouco mais detalhada no feedback estatístico, mas baseada na mentalidade “KISS”; "Mantenha isso simples, idiota."


Uma palavra-chave e amp; conceito para tomar nota de aqui é a palavra "Expectativa". Este tipo de "Calculadora de Negociação de Planilha" possui algum valor em descrever possíveis resultados "prováveis" que são derivados de algumas das suas métricas comerciais negociadas; nomeadamente;


Métricas de negociação definidas pelo usuário.


Taxa de ganhos Risco médio% por comércio como função do patrimônio da conta Retorno médio do montante de Comissões / cadáveres assumidos pelo risco por viagem de ida e volta.


Em primeiro lugar, esta 'Planilha de Negociação Monte Carlo GRATUITA' não é inovadora de qualquer forma, embora o 'Gráfico de Distribuição de Frequência Horizontal' que eu consegui incorporar (Obrigado novamente Teylyn) nesta planilha de negociação do Excel não seja algo Eu vi em outro lugar; bem, não representado ou formatado desta forma, pelo menos.


Como uma nota, uma característica agradável deste software é a funcionalidade (codificação de dados) relativa à geração de dados de preços sintéticos com base em dados históricos originais (EOD, Intraday etc.) Vale a pena dar uma olhada.


Van Tharp & amp; Múltiplos 'R'.


É quase impossível falar de negociação em relação ao risco e dimensionamento de posição sem mencionar o semideus neste campo; provavelmente o principal especialista em dimensionamento de posição & amp; Gerenciamento de dinheiro; ou seja, Dr. Van Tharp Ph. D. Seu conceito muito útil de R, R-Multiples & amp; Expectativa de comércio. Não sinto a necessidade; nem estou tentando reinventar a roda aqui; então aqui está um link para a explicação do Dr. Van Tharp sobre o que 'Expectancy' é.


Prefiro liderá-lo aqui do que apenas repetir ou parafrasear sua explicação.


Embora Van Tharp fala em termos de;


'R' (Basicamente £ em risco por negociação). 'R Múltiplos' (Uma ótima maneira de avaliar o desempenho do seu negócio em relação ao seu risco inicial.) 'Expectativa' (Média ou Média do R-Múltiplo Gerado pelo seu sistema de negociação) . ”)


"A expectativa lhe diz o lucro ou a perda líquida que você pode esperar de um grande número de unidades individuais".


Dr. Van Tharp; (Página 135 - Comércio do seu caminho para a liberdade financeira).


Gostaria de salientar que o meu "Monte Carlo Trading Simulator" gera resultados usando um "R" constante para todos os negócios.


Todas as negociações vencedoras são derivadas de um% de risco consistente por negociação que nunca varia. Todas as perdas também são derivadas do mesmo% de risco inicial. Um dos principais fatores determinantes para cada comércio é que ele é baseado em "PAYOFF RATIO" de seus sistemas (Simplesmente seus sistemas, lucro médio por troca dividido por sua perda média de sistemas por comércio). Ele também leva em consideração todos os.


'Métricas de Negociação Definidas pelo Usuário' mencionadas anteriormente.


Então, isso não mostra as variações aleatórias nos retornos que um cenário de vida real seria. Assim, o significado de "R" como uma métrica de avaliação ou KPI para comparar o desempenho de 1 comércio em relação a outro é realmente não aplicável aqui.


'R' & amp; Múltiplos ou "R" são extremamente importantes; seu verdadeiro valor em quantificar, avaliar e podendo comparar cada uma das suas negociações um contra o outro. Isso leva a 'R-Multiples' para lhe dizer a eficiência do seu sistema; canalize, em última instância, a "Expectativa" do seu sistema sobre a quantidade de negociações x.


Apenas para adicionar; Talvez o Santo Graal de Negociação esteja usando 'R' para;


"Mantenha suas perdas para 1R tão frequentemente como possível.


& amp; Suas Mercados Rentáveis ​​Multiplos Altos de R. "


Por que eu criei essas planilhas de simulador de negociação?


A razão pela qual criei esta planilha de negociação?


Realmente foi para ajudar os comerciantes através da interação imersiva; induzir & amp; cultive uma mentalidade voltada NÃO para um vencedor & amp; perder mentalidade, mas que nutre & amp; promove um estado de espírito que se baseia no conceito de expectativas positivas. Assim; pensando & amp; negociação em termos de rácios de recompensa de risco, negociação com objetividade; buscando uma expectativa positiva como resultado final; é preciso trocar enquanto mantém no olho da mente uma imagem maior / maior de sucesso comercial. O sucesso comercial não pode ser obtido através de uma perspectiva macro constante.


Ele está sendo negociado a partir de várias perspectivas que abrangem o pensamento em termos de RENTABILIDADE. Eu suspeito de alguns de vocês, se não todos vocês esperassem que eu dissesse "Você deve negociar em termos de probabilidades". Você procura uma "expectativa positiva" de que, dentro de uma "cesta" de trades durante o período de "x" você é um vencedor líquido. Você comercializa a LUCRATIVIDADE a longo prazo, o que significa negociar com objetivos predeterminados que visam uma expectativa positiva.


“SUPER TRADING NÃO É SOBRE PROBABILIDADE; É SOBRE RENTABILIDADE! ”


Por favor lembre-se:


Negociar é ter um sistema lucrativo; um sistema de negociação que tem uma expectativa positiva a longo prazo.


Ter uma alta taxa de vitória geralmente está associada a pequenos lucros (geralmente, grandes perdas).


Os melhores sistemas de negociação são, com frequência, um pouco acima do limite, mesmo em% de taxa de ganho.


Procure uma expectativa positiva em seu sistema comercial.


Trocar lucratividade definido & amp; alinhados pelos seus objetivos.


A probabilidade desempenha um papel na negociação atualizada; mas seu governador é rentabilidade!


Day Trading Simulator Gallery.


Área de download do Trading Simulator.


(Random Spreadsheet ATUALIZADO 13/07/2017, agora trabalhando novamente.


FIX & # 8211; Codificação alterada no VBA em como a planilha solicita dados via HTTP Server pedido).


Características do Simulador de Negociação.


Existem 3 versões diferentes para download.


A única variável está em como os números aleatórios são gerados.


A versão 'Monte Carlo' usa a função 'RAND ()' embutida no Excel.


A versão 'Mersenne Twister' está usando um complemento de Excel GRATUITO via RiskAMP, (Obrigado novamente pelo Duncan Werner por responder ao meu pedido para uma versão completa do Excel 64bit 2010). Basicamente, este ainda é um gerador de números pseudorrecionais "Isso foi projetado especificamente para corrigir muitas das falhas encontradas em algoritmos mais antigos" (ou seja, Monte Carlo), pelo menos, isso é o que a Wikipedia afirma, então deve ser verdade! 🙂


Finalmente; a versão "aleatória". Um utilitário de importação muito bacana (cortesia de Norie; Excel Coding GURU) que permite a importação de números aleatórios aleatórios.


"O aleitamento vem do ruído atmosférico, que por muitos propósitos é melhor que os algoritmos de números pseudo-aleatórios normalmente usados ​​em programas de computador".


(Retirado do site da Random).


Alguns recursos valem a pena mencionar que eu consegui integrar todos os 3 desses simuladores de "Expectancy" de negociação.


Um Gráfico de Distribuição de Freqüência, que eu não vi em outros lugares retratado dessa maneira no formato excel. (Obrigado novamente Teyln). Uma "Probabilidade estatística" de WINS e amp; Tabela PERDAS - com uma entrada de usuário personalizada. Drawdown Recovery (%). A maioria das vitórias consecutivas & amp; Perdas (quantidade numérica e quantia). Maiores Resultados de Perda de Perda (£ 's). Maior Perder Comércio (£ 's) & amp; sua localização de referência celular dentro da simulação de 500 negociações aleatórias. Menor Equity Baixo (£ 's). Total de ganhos e amp; Perdas totais (numéricas e £ 's). Average Trade Win & amp; Perda em (£ 's) & amp; como um (%). Ganho de pico (£ 's).


Como mencionado anteriormente; não há nada inovador aqui; & amp; você pode ver TODO o código dentro de TODAS essas Planilhas de Negociação GRATUITAS. Eu propositadamente não protegido por senha nenhuma parte dessas planilhas de negócios de excel. Isso pode ajudar / empurrar alguns de vocês para tentar & amp; "Ajustar" ou criar suas próprias versões; SEJA CRIATIVO!


"Para viver uma vida criativa, devemos perder nosso medo de estar errado".


(Joseph Chilton Pearce)


Por que usar um simulador?


No livro de Malcolm Gladwell 'Outliers' Gladwell afirma que é preciso 10.000 horas de compromisso para se tornar bem sucedido em qualquer empreendimento.


K. Anders Ericsson em seu livro 'The Road To Excellence', estima um valor de 10 anos. Por que isso é importante, & amp; O que isso tem a ver com Trading Simulation?


Os pontos acima apontam para o domínio dentro do modelo de matriz de aprendizagem de competência consciente.


Para Super Trade, é preciso alcançar um nível de pensamento / comportamento que seja congruente com a "Competência Inconsciente" (embora o modelo de aprendizado de "Competência Consciente" de STD seja bem conhecido como modelo de matriz de 4 caixas, peço que considere, & amp; I Estou de acordo com a integração de um 5º elemento, um loop de feedback. Imagem: "Will Tayor & # 8217; S - Matriz de Competências". cortesia de: Businessballs.


Menciono competência como este é o parceiro; & amp; um ingrediente essencial para o Super Trade. Parceria com o que você pode questionar?


"Objetivamente, Super Trading parece ser um comportamento HABILIDADE, negociando em um estado de competência inconsciente. A ironia é que Super Trading é 100% psicológico! "


Se Super Trading é 100% psicológico, como a psicologia desempenha seu papel ao usar um simulador de negociação?


Você consegue controlar PSICOLOGICAMENTE a figura de retração projetada do simulador de negociação? Você consegue controlar PSICOLOGICAMENTE as cordas / clusters de perdas ao longo do tempo? Você consegue controlar PSICOLOGICAMENTE uma taxa de vitória moderada (exemplo: 50%); sabendo que você está errado 50% do tempo? Você é psicologicamente disciplinado para manter consistentemente uma% de alocação de risco pré-determinada, mesmo após uma série de perdas? Você pode PSICOLOGICAMENTE aderir ao seu sistema em diferentes condições de mercado?


The Take Aways.


ESTÁ BEM. O que você pode tirar desta publicação & amp; minhas planilhas do simulador de expectativa de negociação do dia?


Pareto nos deu a regra 80/20. Assim; 'Estilo Pareto', o que posso lhe dar em poucas palavras, que lhe dará o maior sucesso para o seu dinheiro em relação a essas planilhas de simulação de negociação?


3 palavras; OBJETIVOS, RISCOS, FREQUÊNCIA.


ALLWAYS Comércio com OBJECTIVOS pré-determinados. Então tente buscar parâmetros dentro desses simuladores de "Expectativa" que irão combinar & amp; seja congruente com seus objetivos de negociação. ENTENDER Dimensionamento da posição; sua alocação de RISCO em £ por negociação para atender seus OBJECTIVOS. É crítico. FREQÜÊNCIA . Esteja ciente de que ter um montante desejado (£) para atingir, enquanto integrando o dimensionamento correto da posição só pode ser alcançado se você tiver trocas suficientes para atender ao resultado desejado (£). A FREQÜÊNCIA de seus negócios desempenha um papel importante na rapidez com que você pode obter o resultado desejado. Procure uma estratégia (ou combine estratégias) que gerem sinais de compra / venda suficientes que irão realizar seus objetivos ao longo do tempo.


Falácia dos jogadores.


#Side Nota: Algo que eu gostaria de mencionar, pois surge muito, ou seja, "Falácia de Jogadores". Uma "crença" comum é que, após uma série de negociações perdidas, suas probabilidades de ganhar na próxima negociação parecem mais prováveis. , uma regressão à média; então você deve aumentar o tamanho da sua posição no próximo comércio. (MARTINGALE).


Larry Williams declara: "Depois que você teve 3 ou 4 negócios perdidos seguidos, a probabilidade do próximo negócio não é apenas um vencedor, mas um vencedor substancial está à sua disposição."


A implicação aqui é que a probabilidade de ganhar cada negociação é de alguma forma influenciada pelo resultado dos negócios anteriores. Não é verdade para lançamento de moeda & amp; a maioria dos outros eventos aleatórios. As moedas não têm memória de que lado surgiu o último. Cada lance é totalmente independente do anterior.


Os defensores de 'Martingale Strategies argumentam que na negociação real, cada comércio não é independente do comércio anterior.


Exemplo: se você trocar um sistema de breakout, talvez após várias falhas, o sucesso seja mais provável. O problema é que não sabemos com antecedência qual teste irá beneficiar do tamanho aumentado. Portanto, o tamanho crescente da posição pode deixar você com uma grande perda; especialmente se você estiver aumentando seu risco por troca, pois sua conta está reduzindo o valor (£).


Embora você possa conceituar de onde Larry está vindo com sua idéia de "Probabilidade de Vencimento", as estratégias de Martingale são potencialmente muito perigosas se usadas de forma consistente como uma estratégia de dimensionamento de posição a mais longo prazo.


Eu não estou falando aqui o montante "A média" em um comércio de forma incremental. O que Larry está dizendo é; se você perder, diga 4 vezes seguidas, o seu 5º comércio é muito favorável para ser um vencedor. "POTENCIALMENTE MUITO PERIGOSO, SE NÃO É DESASTRO. Por favor; não é ruim para esta metodologia.


# Alguma informação adaptada do site da Larry Sander; estratégias de negociação.


#Recente Evento 2012: comerciante Bruno Iksil & # 8211; $ 2 bilhões de perda; JP Morgan,


#Também Nota: as planilhas do simulador de negociação têm uma Calculadora de perda / perda de probabilidade estatística integral, para que você possa ver estatisticamente quantos vencedores ou perdedores em uma linha você pode esperar sobre os 500 negócios simulados aleatórios ou um número definido por usuários de negócios, tendo em conta a sua taxa de vitórias.


Isso é importante, porque se você tiver um sistema com uma taxa de ganhos que seja pouco mais fácil, você poderia esperar ter um grande número de perdas seguidas (o que minha calculadora de expectativa representaria). Se você estivesse usando uma estratégia da Martingale à medida que o seu patrimônio da conta diminuiu, isso pode ser catastrófico. As palavras "Margin Call" vêm à mente!


As estratégias de 'Martingale' para comércio são perigosas. Eles simplesmente não funcionam.


Estratégias anti-Martingale não são perigosas & amp; Faça Work & # 8211; SE implementado corretamente!


"Estratégias anti-Martingale, que chamam de maior risco durante uma série vencedora, trabalhem - ambos na arena de jogo e amp; Na The Investment Arena ".


Page 285 & # 8211; Faça o seu caminho para a liberdade financeira. & # 8211; Dr. Van Tharp, PhD.


Uma metáfora de negociação;


"Imagine em sua mente um artista; um dos grandes.


Ele está de pé na frente de seu cavalete que suavemente acumula sua tela; sua visão.


Ele está totalmente envolvido; em um & # 8216; FLOW & # 8217; Estado; nutrindo seu processo criativo.


Seu pincel controla sua mão direita; uma extensão de sua mente.


Sua paleta está inundada com seu conceito único de cores que aguardam na sua esquerda.


Sua tela; sua visão requer profundidade para transmitir maior clareza; para cristalizar sua perspectiva.


Ele escolhe uma cor de sua paleta subjetiva para instigar a mudança; Pequenos golpes de luz melhoram sua paisagem ".


Um Simulador de Negociação é apenas uma cor na sua paleta de ferramentas de negociação que podem ser acessadas a qualquer momento para melhorar o & amp; ilumine sua tela ideal.


Esta 1 'ferramenta de coloração' pode parecer à primeira vista para desempenhar uma pequena parte em sua & # 8216; artwork; & # 8217; Mas, o que é importante, pode "mudar sua perspectiva" na forma como você vê seus resultados futuros.


Usado com sabedoria, um simulador comercial ajuda a pintar uma imagem diferente que pode instigar uma nova crença positiva; & amp; Nós trocamos nossas crenças!


Finalmente; Eu deixo você com uma citação de Richard Bandler (criador da Co-PNL)


"A maneira como conduzimos nossas vidas é um resultado direto de como vemos o futuro.


É somente por meio de uma perspectiva que você consegue fazer as coisas de maneira diferente. & # 8221;


Assimilate sua negociação com uma mentalidade que tenha um "OBJETIVO" predeterminado claro, integrar um sistema de negociação com uma "EXPECTATIVA POSITIVA". Controla o seu "RISCO" e " garantir que "FREQUÊNCIA" seja sua amiga; mas mais importante;


Aprenda na hora de dominar o seu eu!


"A certeza que conhecemos sobre os mercados; É a incerteza deles!


"Desejo-lhe bem na sua jornada e amp; na sua negociação. "


5 pensamentos sobre & ldquo; Day Trading & # 8216; Expectancy & # 8217; Simulação & rdquo;


Esta é a segunda vez que estou no seu website. Obrigado por publicar mais detalhes.


Não era o que eu esperava, mas de qualquer forma! Agradável!


Tropeçar no trabalho que você colocou de graça foi inspirador. Obrigado pelo que você compartilhou!


Awesome, Awesome, Awesome, Super Awesome, & # 8211; Obrigado.


Sistema de negociação completo.


Excel sistema de negociação completo para análise técnica.


Excel Complete Trading System.


Analisador XL - Biblioteca de 146 funções de análise técnica, indicadores e especialistas sob a forma de fórmulas do Excel. Um indicador é usado para determinar a tendência de um mercado, a força do mercado e a direção do mercado. Um especialista é um sistema de mercado de ações predefinido. Downloader XL - faz download gratuito de dados históricos, índices e dados de fundos mútuos do Yahoo! Finança. Os dados históricos estão disponíveis nas trocas nos EUA, Canadá, Reino Unido, Irlanda, Alemanha, França, Itália, Austrália, Nova Zelândia, Índia e muito mais. BulkQuotes XL - projetado para lidar facilmente com downloads e atualizações para dezenas ou centenas de tickers simultaneamente. O BulkQuotes XL é projetado como um complemento do Excel, oferecendo-lhe uma grande flexibilidade e permitindo que você aplique imediatamente análises técnicas aos dados baixados. Você pode até ter suas próprias macros aplicadas instantaneamente em todos os seus tickers. RT Quotes XL - faz o download de ações em tempo real, índice, futuros, opções e cotações de fundos mútuos diretamente nas planilhas do Microsoft Excel. As cotações em tempo real gratuitas de 15 minutos e com base em taxas de ações, opções, índices e fundos mútuos são obtidas de Yahoo! Finança. Os dados estão disponíveis em mais de 50 mercados mundiais, incluindo EUA, Canadá, Reino Unido, Alemanha, França, Itália, Austrália e Índia. As cotações em tempo real baseadas em taxas estão disponíveis no PCQuote para ações, opções, índices e futuros. Predictor XL - Ferramenta de previsão de rede neural que resolve rápida e precisamente problemas de previsão e estimativa. É projetado desde o início para auxiliar os especialistas na solução de problemas de previsão do mundo real. A ferramenta Excel traz maior precisão e precisão para uma ampla variedade de tarefas, incluindo o preço das ações e a previsão do mercado. Backtesting XL - Um suplemento para testar estratégias de negociação no Microsoft Excel. Ele permite o teste e a avaliação de estratégias comerciais de fim de dia usando dados históricos. As funções podem ser usadas opcionalmente no Excel VBA. O complemento de back-testing suporta funcionalidades avançadas, como pyramiding (mudança de tamanho de posição durante um comércio aberto), limitação de posição curta / longa, cálculo de comissão, rastreamento de patrimônio, controle de dinheiro e customização de preço de compra / venda ( comércio nos preços Open, Close, High ou Low de hoje ou amanhã). Classificador XL - Um complemento para Excel projetado para auxiliar especialistas em tarefas de reconhecimento de padrões e mineração de dados do mundo real. Ele esconde a complexidade subjacente dos processos de rede neural ao fornecer gráficos e estatísticas para o usuário facilmente entender os resultados. A capacidade de lidar com numerosas variáveis, muitas vezes inter-relacionadas, é amplamente aplicável à classificação de dados de mercado. Por exemplo, um comerciante pode querer classificar ações como comprar, manter ou vender com base em dados históricos. Portfolio XL - um complemento de rastreamento de portfólio para o Microsoft Excel. Ele permite que você crie um portfólio de ações que podem ser atualizadas intra-dia. Você especifica determinados tickers, o preço e a data de compra e o Portfolio XL monitora o valor do preço do seu portfólio e do histórico de transações. Ele também exibe o valor atual de suas ações. Opções XL - cadeias de opções e download da série LEAPS para o Microsoft Excel. Ele faz o download de cadeias para opções negociadas nessas bolsas: CBOE (Chicago Board Options Exchange), AMEX (American Stock Exchange), PHLX (Bolsa de Valores de Filadélfia), PCX ou PSE (Bolsa de Valores do Pacífico), ISE (International Securities Exchange).


O sistema de negociação completo para atualizações de versão do Excel é gratuito para toda a vida.


(Atualizado em 2018-01-09)


Soluções Excel Relacionadas para Sistema de Negociação Completo.


Navegue as principais categorias de soluções do Excel.


Outras soluções de negócios do Excel são categorizadas como soluções do Excel grátis e as mais populares. Outras soluções propostas para requisitos de usuários específicos podem ser encontradas no Fórum de Ajuda do Excel ou propostas como um projeto para a comunidade freelance do Excel.


A planilha do Excel do meu sistema de negociação de ações dos EUA.


Esta semana eu comecei a negociar os mercados dos EUA e especificamente as ações da SP500. Eu criei uma planilha do Excel onde eu acompanho as ações que compro ou vendo de acordo com o meu sistema de negociação online. Devo confessar que a aventura começou bem e acima das minhas expectativas, uma vez que é a primeira vez que estou negociando on-line a bolsa de valores dos EUA.


No momento da redação, não estou segurando nenhum estoque. A planilha do Excel consiste em cerca de 15 colunas, incluindo o nome do estoque, o preço de compra ou venda, o preço limite da parada, o número de ações, o capital em risco, o risco por negociação e o P / L. Também estou usando a planilha para calcular outros dados estatísticos significativos sobre o sistema de negociação de ações on-line, como taxa média de ganhos / perdas e porcentagem vencedora que me ajudará no futuro a avaliar o sistema de negociação.


Agora, devo notar que esta planilha do Excel não é a primeira que eu criei em relação à negociação online. Na verdade, foi criado quando comecei a negociar a bolsa de valores grega. Eu mantive o mesmo layout até agora, uma vez que se provou bastante útil. As únicas coisas que mudaram são o cálculo da comissão e a inclusão de pedidos curtos, algo que não está disponível para a bolsa de valores do meu país. Para cada bolsa de valores agora que eu tenho sido um Interactive Brokers & # 8217; Cliente, copiei a folha para abas diferentes, de modo que vejo minha performance individualmente.


Na primeira linha, meu capital inicial está disponível. O risco máximo por comércio é calculado de acordo com essa quantia de dinheiro. Ao lado dele, você pode ver que arrisco o máximo de 1% do capital por comércio. Em seguida vem o mês e, ao lado, meu risco total é de 10%. Isso significa que, sem dúvida, estarei arriscando mais de 10% do meu capital em todos os negócios combinados. Uma vez que o meu risco total por comércio é de 1%, tenho permissão para trocar 10 ações simultaneamente, a menos que eu suba a perda. Mais sobre isso depois. O risco de correr é a quantidade de dinheiro que arrisco para todos os meus negócios abertos. Embora neste momento não estou segurando estoque (mesmo o AMAT na última linha), mantive os dados na última linha para que eu o copie para as minhas próximas negociações.


O primeiro estoque que troquei foi BMY na quinta-feira. Talvez eu inclua uma coluna da Data em algum lugar. A verdade é que eu tenho essa coluna, mas eu não estava sendo disciplinado o suficiente para acompanhar as datas também! De qualquer forma, comprei BMY em 24.36 e defini a minha parada de perda às 24.00. A planilha, em seguida, preencheu as ações & # 8220; Risk / Share & # 8221 ;, & # 8220; Shares & # 8221; e & # 8220; Buy & # 8221; células, indicando que eu deveria comprar 278 ações em 24.36. Ao entrar, então, às 24 horas, como um novo Stop Loss, o dinheiro em risco seria 100, significando que, se eu vendesse o estoque às 24 horas, eu perderia US $ 100, 1% do meu capital inicial. Bem, o estoque subiu e eu o vendi aos 25,47, aproveitando um aumento de 4,56%. Isso significa que, ao vender as ações, recebi cerca de US $ 7.000 e o P / L desse negócio foi de cerca de US $ 300 para mim. O & # 8220; Equity & # 8221; A célula continuou e adicionou o montante.


Como faço para usar esta planilha durante a negociação do mercado de ações dos EUA? Dado que minha configuração comercial é composta por 4 monitores, eu carrego essa planilha no monitor mais à esquerda. Quando eu decidir comprar um estoque, eu entro o nome do estoque, o preço do limite de compra e a perda de parada e a planilha do Excel me diz quantas ações eu devo comprar para que eu não venha arriscar mais de 1%. Em seguida, entrei e envie o pedido através dos Interactive Brokers & # 8217; BookTrader. Se houver uma mudança de preço, eu mudo rapidamente o & # 8220; Comprar & # 8221; preço, para que eu compre o valor correto das ações.


Agora, vamos dizer que o BMY subiu muito e eu decidi mudar minha parada de perda em 24.36 tornando-se um comércio de ponto de equilíbrio no pior cenário. Eu não arrisco mais o dinheiro nesse comércio, permitindo-me negociar mais um estoque em vez disso. Então, se eu mantivesse 10 ações em um ponto e não tivesse permissão para negociar mais devido à regra de risco total de 10%, esse movimento de perda de parada significaria que meu risco total seria de 9%, permitindo abrir mais um comércio.


Quando eu troco, exclico a & # 8220; Nova parada de perda & # 8221; celular, já que eu não mantenho o estoque e entro no & # 8220; Sell & # 8221; dados de preço, de modo que ele calculou meu lucro ou prejuízo. Dependendo se o comércio foi lucrativo ou não, coro a linha em verde ou vermelho, respectivamente. Você pode ver que os primeiros 9 negócios foram lucrativos, uma ótima maneira de começar!


Neste ponto, ganhei não estar recalculando o meu capital disponível até eu trocar 200 ações americanas e chegar a hipóteses seguras sobre a eficácia do meu sistema comercial. Quando estou confiante no meu estilo de negociação pessoal, vou mudar o capital comercial disponível quando houver um ganho ou perda de US $ 2.000.


Jim entrou no mundo financeiro ao negociar esportes e agora investe em mercados de ações e forex dos EUA, tentando comprar baixo e vender alto. Conecte-se com Jim: StockTwits | TradingView.


Você pode gostar.


Mantenha-se informado!


Receba nossas análises semanais de investimentos e mercado diretamente na sua caixa de entrada de e-mails todos os domingos!


Obrigado por se inscrever.


Algo deu errado.


Nós respeitamos sua privacidade.


Postagens recentes.


Quanta vantagem você deve usar ao negociar Forex?


Leverage é uma ferramenta extremamente poderosa no arsenal de um comerciante experiente, mas com grande poder, é uma grande responsabilidade.


Por que opções binárias não podem ser consideradas como um investimento.


Existem muitas opções de investimento no mercado. Aqui, exploramos quais opções binárias são e por quê.


Respondendo a perguntas básicas antes de negociar com opções binárias.


Quais são as opções binárias? Como faço para negociar com eles? Ins e outs. Estratégias, regulamentos e mais informações.


Comparando Corretores de Opções Binárias Corretamente.


A negociação de opções binárias, à primeira vista, parece uma forma relativamente simples de investimento alternativo online. Simplesmente "Ligue".


Como as startups bitcoin podem alimentar uma manifestação no mercado Bitcoin.


Investidores sérios gastam grande quantidade de dinheiro nas startups de Bitcoin. Como isso interessa nas startups Bitcoin.


Relaxe sua rotina de negociação com um período de tempo apropriado.


Ilumine sua vida comercial, escolhendo um adequado para o seu tempo de vida permitindo que você se sinta relaxado.


Quatro razões pelas quais eu sou curto AUD / NZD.


Venda a descoberto de AUD / NZD com base em médias móveis, um nível de resistência e uma cruz MACD. Leia como estou planejando.


Como o TradingView Reposting to StockTwits pode ser melhorado.


O TradingView permite repostar idéias de negociação para a StockTwits, a plataforma de recursos financeiros do Twitter. No entanto, aqui é por isso que a integração.


É hora de comprar o petróleo bruto?


O petróleo bruto está tentando uma retração para preços mais altos neste mês, após um declínio de 7 meses.


Leia e discuta documentos financeiros em duas margens.


Você pode analisar informações financeiras? Leia, anote e discuta os dados financeiros divulgados pelas empresas, tais como ganhos e.


Um blog de análise de mercado e investimento sobre negociação e finanças online. Tópicos variam de ações e negociação forex, para estratégias de negociação e avaliações de corretor.


Spreadsheet Systems, Alerts e Automated Trading.


Documentação Relacionada.


Visão geral de estudos de planilhas usando a planilha Estudo Folha de cálculo Sistemas, alertas e negociação automatizada Folha de cálculo Inputs Referindo outros gráficos na planilha Estudo Fórmulas Estudos de planilhas Tarefas especiais Compartilhando seu estudo de planilha com outro usuário Trabalhando com planilhas Funções de planilha.


Nesta página.


Informações gerais Criando um sistema ou alerta Coluna de entrada longa Coluna de saída longa Coluna de entrada curta Coluna de saída curta Outras colunas Alterando nomes de colunas Controlando o local da varredura de setas Criando um sistema de negociação para negociação automatizada (Aplica-se apenas ao sistema de planilha para negociação) ao som comercial não-simulado (Live) para alertas audíveis e notificações de mensagens de e-mail Iniciando negociações com negociação automática e exceções de pedidos manuais ou anexados (aplica-se apenas ao sistema de planilha para negociação) Estratégias de saída avançadas automatizadas (Aplica-se ao sistema de planilha para Apenas para negociação) Entradas de estudo de planilha que são específicas para sistemas, alertas e compras automatizadas BuyEntry (K), BuyExit (L), SellEntry (M), SellExit (N) Folha de cálculo Ordem Colunas de ação (Aplica apenas para o Spreadsheet System for Trading) Ignorado Sinais com sistemas de planilhas ou alertas Introdução Como ativar a negociação automática de sinais ignorados durante dados históricos Fazer download de setas de compra / venda Não significa sinais de comércio Reportagem no novo sinal da barra Apenas uma vez por Bar Sinal somente na barra Fechar Solução de problemas Sistema / Alertas e estilo de desenho Comércio diferente de zero Posição Quantidade atrasada VERDADEIRO Resultado de Fórmulas Spreadsheet Sistema para Procedimento de Teste de Negociação Setas ou Sinais Desaparecidos Folha de Cálculo Especial Saídas dos Valores Inserções especiais de comercialização de planilha na planilha (Aplica-se apenas ao sistema de planilha para negociação) Teste de volta (Aplica-se apenas ao sistema de planilha para negociação) Cálculos de planilha e Estudo de planilha Processamento de dados de planilha Solicitação de processamento de coluna de fórmula e ordem de cálculo interno Exemplo de troca automatizada de saída múltipla (Aplica-se apenas ao Spreadsheet System for Trading) Limitando a negociação a certas intervalos de tempo.


Em versões recentes do Sierra Chart renomeamos Workbook e Worksheet para Spreadsheet. Os 3 estudos da Planilha agora foram renomeados e começam com o nome Planilha. O estudo da Planilha foi renomeado para Estudo de Planilha. Esta documentação usa o termo Planilha. Na versão do Sierra Chart que você está executando, você pode se referir aos nomes dos estudos começando com o nome antigo Planilha.


Informação geral.


O estudo Spreadsheet System / Alert eo estudo Spreadsheet System for Trading podem ser usados ​​para criar um Sistema de Negociação ou um Alerta para o seu gráfico. Um sistema de negociação ou um alerta significa regras que você define que fornecerão sinais de compra ou venda quando as regras forem verdadeiras para uma determinada barra no gráfico. Esses sinais serão exibidos como indicações gráficas no gráfico, mostrar linhas de alerta de texto e fornecer alertas sonoros. No caso do estudo do Sistema de Planilhas para Negociação, as ordens reais também serão dadas. Um alerta refere-se ao sinal dado quando suas regras de Sistema / Alerta são verdadeiras na última barra. Tudo isso é descrito em mais detalhes abaixo.


Se você está apenas interessado em obter um alerta quando sua condição for verdadeira no final do gráfico e você não precisa ver indicações gráficas históricas no gráfico, então, na maioria dos casos, você simplesmente pode usar o recurso Alerta Simples. E não se incomodar com os estudos mais avançados da planilha.


A diferença entre o estudo do Spreadsheet System for Trading, em comparação com o estudo Spreadsheet System / Alert, é que o estudo Spreadsheet System for Trading possui uma lógica muito mais avançada para a criação de um sistema comercial.


Com o estudo do Spreadsheet System for Trading, você pode executar testes de volta e gerar sinais comerciais reais que serão simulados ou podem ser enviados para o seu serviço comercial. Por padrão, eles sempre serão simulados. Mesmo que você não queira realmente colocar pedidos Live com o estudo Spreadsheet System for Trading, e você só quer criar um sistema e testá-lo de volta, ou apenas desejar colocar trades manualmente a partir dele, você ainda vai querer usar a planilha Sistema para negociação de estudo em vez do estudo Sistema de Planilhas / Alerta.


Se você simplesmente quiser criar um sistema simples ou Alerta avançado para dar uma indicação quando suas regras retornarem TRUE, você quer usar o estudo Spreadsheet System / Alert.


Criar um Sistema / Alerta é realizado digitando uma Fórmula de Condição nas colunas de fórmulas na Folha de Cálculo. Esta fórmula de condição pode acessar o preço e os dados de estudo (os dados do estudo são emitidos começando na coluna AA por padrão e dependem do número de entradas de fórmulas da fórmula).


Esta fórmula de condição será aplicada em todo o gráfico de preços. Ele será continuamente monitorado e também pode ser verificado (você não deve fazer negociações automatizadas a partir de uma varredura). Essa Fórmula de Condição é usada para fornecer uma indicação de quando uma determinada condição é TRUE para qualquer coluna / barra do gráfico. Essas indicações são usadas para criar um sistema de negociação ou um alerta.


Não existe diferença entre o modo como Sierra Chart faz sistemas e alertas. Ambos dão indicações gráficas, de texto e audíveis quando a sua Fórmula de condição é VERDADEIRA. Apesar disso, uma mensagem de texto, som audível e um sinal de comércio, no caso do estudo do Spreadsheet System for Trading, são fornecidos apenas quando uma fórmula de condição retorna TRUE na última coluna no gráfico.


Além disso, quando uma Fórmula de condição é VERDADEIRA na última coluna do gráfico, então uma! A marca será exibida na frente do nome do estudo e o nome do estudo será destacado em vermelho. O texto da mensagem de alerta e o som de alerta sonoro são o que constitui uma indicação de alerta.


No caso do estudo Spreadsheet System for Trading, um sinal comercial e um alerta não são necessariamente dados quando a Fórmula de condição em uma das colunas de fórmula Comprar / Vender Entrada / Saída retorna TRUE na última coluna no gráfico. Existe outra lógica que é aplicada e outras condições precisam ser atendidas. Tudo isso é explicado nesta página.


Além disso, no caso do estudo Spreadsheet System for Trading, se a sua fórmula de condição retornar TRUE na última coluna no gráfico, ela será ignorada se os dados estiverem sendo baixados no gráfico ou quando o gráfico for totalmente recalculado. Estes são métodos de segurança para evitar que as negociações sejam feitas de forma não intencional, no caso em que o Sierra Chart não está no modo de simulação de negociação.


O Sierra Chart fornece um alerta de texto para sua Fórmula de Condição quando ela se torna VERDADEIRA ao adicionar uma mensagem detalhada ao Registro de Alertas. Para abrir o registro de alertas, selecione Janela & gt; & gt; Alerts Manager & gt; & gt; Alertas Registe-se no menu. Se a condição for TRUE em uma coluna / barra de gráfico diferente da última coluna do gráfico, apenas uma indicação gráfica será fornecida.


Criando um Sistema ou Alerta.


Esta seção se aplica ao estudo Sistema de planilhas / Alerta.


Siga as instruções passo a passo do Estudo da Folha de Cálculo.


Ao seguir essas instruções e chegar ao passo para adicionar o estudo ao gráfico, certifique-se de adicionar, em vez disso, o estudo Spreadsheet System / Alert.


Quando chegar à etapa em que você inserir uma fórmula, insira sua fórmula de condição de sistema / alerta. Consulte a seção de Exemplos abaixo, por exemplo, Fórmulas de Spreadsheet System / Alert Condition.


No caso do estudo Spreadsheet System / Alert, a fórmula resultante da Folha de Cálculo será exibida na área principal do gráfico de preços (Gráfico Região 1) do gráfico e desenhada com estilos de seta para cima / para baixo por padrão. O Estilo de desenho pode ser alterado através das configurações de Subgrafias na guia Subgrafias da janela Configurações do Estudo para o estudo Spreadsheet System / Alert. Para obter instruções, consulte Adição / Modificação de estudos.


As fórmulas na planilha devem retornar um valor 1 (TRUE) ou 0 (FALSE). Um valor de 1 ou VERDADEIRO indica que a condição da fórmula Sistema / Alerta foi atendida. Por exemplo: Enter = ID0.SG43 & lt; 100 na linha 3 da coluna de fórmula K para configurar um alerta de entrada longa quando o preço de fechamento for menor que 100.


Coluna de Entrada Longa.


A coluna K é a coluna Entrada Longa. Se uma célula nesta coluna for VERDADEIRA (1), então uma Seta para cima (depende do estilo do desenho do subgrupo) será desenhada no gráfico com o valor baixo da barra correspondente para indicar uma entrada longa para essa barra.


Coluna de saída longa.


A coluna L é a coluna Long Exit. Se uma célula nesta coluna for VERDADEIRA (1), então uma seta para a esquerda (depende do estilo de desenho do subgrupo) será desenhada no gráfico no alto valor da barra correspondente para indicar uma saída longa para essa barra.


Coluna de entrada curta.


A coluna M é a coluna de entrada curta. Se uma célula nesta coluna for VERDADEIRA (1), então, uma seta para baixo (dependendo do estilo de desenho do subgrupo) será desenhada no gráfico com o valor alto da barra correspondente para indicar uma entrada curta.


Coluna de saída curta.


A coluna N é a coluna Short Exit. Se uma célula nesta coluna for VERDADEIRA (1), então uma Seta Direita (depende do Estilo de Desenho Subgráfico) será desenhada no gráfico no valor baixo da barra para indicar uma Saída Curta.


Outras colunas.


Quando graficar colunas que não sejam K, L, M ou N com um Estilo de Draw visível, o valor de retorno da Fórmula de Condição deve estar dentro do intervalo de valores do gráfico de preço principal em que seu estudo é sobreposto. Caso contrário, a exibição do subgrupo afetará negativamente a exibição do gráfico.


Não há tradução automática de TRUE (1) ou FALSE (0) para valores de barra alta e baixa, das colunas de fórmula O e superior.


Uma fórmula de exemplo que você pode usar para as colunas de fórmulas O e superiores é = IF (ID0.SG43 & gt; 100, C3, 0).


Alterando nomes de colunas.


Os acima são os nomes das colunas de fórmula Sistema / Alerta padrão. Você pode renomear as colunas na linha 2 na Folha e usá-las para qualquer tipo de condição. Para renomear uma coluna, clique duas vezes na célula com o nome na linha 2 e digite um novo nome.


Controlando a localização das setas ou dos valores do subgrupo.


Você também pode retornar valores diferentes de VERDADEIRO (1) ou FALSO (0) em suas fórmulas de condição do sistema / alerta.


Se o valor retornado pela fórmula não for VERDADEIRO (1) ou FALSO (0), a seta será desenhada no valor que a fórmula retornará ao usar as colunas K, L, M ou N ao usar o estudo Spreadsheet System / Alert .


Para colunas de fórmulas O e superiores, as setas Subgraph ou qualquer que seja o Draw Style, sempre serão desenhadas no valor retornado da fórmula.


When you are using the Spreadsheet System/Alert study, you are able to scan for TRUE results from your System or Alert condition formulas among a list of symbols. For more information, refer to the Scan Menu commands documentation.


Creating a Trading System for Automated Trading.


Halting Order Entry.


If you are using the Spreadsheet System for Trading study on a Live account and sending orders to the connected Trading service, and you wish to halt order entry for any reason, you can do any of the following:


Enable Trade Simulation Mode by making sure that there is a check mark by Trade >> Trade Simulation Mode On . Set the Send Orders To Trade Service input with the Spreadsheet System for Trading study to NO . Set the Disable Auto Trading cell on the Sheet# in the Spreadsheet used by the Spreadsheet System for Trading study, to TRUE. Disable either the Trade >> Auto Trading Enabled - Global or the Trade >> Auto Trading Enabled - Chart commands by removing the checkmark from them. Both of these need to be checked/enabled for automated trading to function for the chart.


Steps To Create a Trading System for Automated Trading.


First make certain that auto trading is enabled. Make certain there is a checkmark by Trade >> Auto Trading Enabled - Global and Trade >> Auto Trading Enabled - Chart on the menu. Make sure there is a check mark by Trade >> Trade Simulation Mode On on the menu. This is so that orders will not be sent to your trading service. Instead all trades will be simulated.


Going From Simulated Trading to Non-Simulated (Live) Trading.


If and when you are ready to have your trading system submit real orders, you will need to go to non-simulated mode by making sure there is no check mark by Trade >> Trade Simulation Mode On .


Next, go to the Study Settings for the Spreadsheet System for Trading study on your chart and set the Send Orders To Trade Service input to Yes .


At this time any trading signals given will be sent as orders to your Trading service, assuming you are connected to a valid Trading service and you are connected to the Data and Trade server ( File >> Connect to Data Feed ).


Keep in mind that if you are using a simulated account with your Trading service, then even though you are not in Sierra Chart Trade Simulation Mode and Send Orders To Trade Service is set to Yes, the orders will still be simulated.


Sound for Audible Alert and E-Mail Message Notifications.


You can specify an alert sound to be played when the System or Alert condition in cells K3 through Z3 become TRUE. For the formulas in the Sheet to trigger sound alerts requires enabling them.


Go to the Study Settings window for your Spreadsheet Study . For instructions, refer to Modifying Studies. Keep in mind, that after a Spreadsheet Study is applied to a chart it changes its name in the Studies to Graph list on the Chart Studies window to the name of the Spreadsheet file it references.


On the Settings and Inputs tab of the Study Settings window you will see a list of all of the available study Inputs. You will see several inputs named Column K, L,M, N,O, P,Q, R,S, T,U, V-Z Alert that will let you select the Alert Sound Number to be used for each column.


Select the Alert Sound Number that you want to use, or select No Alert to not play an alert sound when a formula becomes TRUE in cells K3 through Z3. Sheet columns W through Z use the same alert sound number as column V.


To set the sound file that plays for each alert number, select Global Settings >> General Settings on the menu. You can also setup an email message to be sent when an alert sound is triggered.


If the Draw Style for a Sheet column is set to Ignore , then no System or Alert signals can be triggered by the Sheet formulas. However, this does not apply to column K through N when using the Spreadsheet System for Trading study. With that study, Trade signals can always be triggered by the Sheet formulas regardless of the Draw Style setting.


Initiating Trades with Auto-Trading and Using Manual or Attached Orders Exits.


It is not necessary to use the Buy Exit or Sell Exit Order Action formula cells in the Spreadsheet System for Trading study to exit a current Position. Exits can be done by manually entering an order through the Trade Window, through Chart Trading, or can be performed by using the Attached Orders feature (Targets and Stops).


In any of these cases, you can then optionally leave the Buy Exit or Sell Exit Order Action formula cells blank.


Targets and Stops are configured through the Trade Window on the Targets tab. For complete documentation, refer to the Attached Orders page.


When using Attached Orders, make sure that Use Attached Orders is enabled on the Trade Window for the chart containing the Spreadsheet System for Trading study. Refer to Opening Trade Window for Chart to open the Trade Window.


The set of Attached Orders which is entered on the Trade Window for a chart is saved when a Chartbook is saved.


Orders that are given by the Buy Exit or Sell Exit Order Action formula cells will not use the Attached Orders configured in the Trade Window. Only Buy Entry and Sell Entry will use them when Use Attached Orders is enabled on the Trade Window.


When you are using the automated trading functionality in Sierra Chart, it is recommended that you always enter and cancel any manual orders from within Sierra Chart to avoid any unexpected auto trade issues due to Sierra Chart not being aware of the Orders and Trade Position changes you do from other trading programs.


For additional information about using Attached Orders with an automated trading system, refer to SupportAttachedOrdersForTrading.


Using Both Attached Orders and Buy Exit and Sell Exit at the Same Time.


It is possible to define a set of Attached Orders to use with your Spreadsheet System for Trading study and also use the Buy/Sell Exit columns at the same time. For this to work properly, you need to set Cancel All Working Orders On Exit input to Yes .


Trade Window Order Quantity with Attached Orders.


When you are using Attached Orders with a Spreadsheet System for Trading study, then the Order Quantity on the Trade Window will change to the current Order Quantity specified on the Spreadsheet. This is because the Attached Orders are defined through the Trade Window Targets tab, and it is necessary to update the quantity of the Trade Window to match the order quantity from the trading system in order for the Attached Orders to have a matching quantity.


For more information about setting the Order Quantity for the Spreadsheet System for Trading study, refer to Cell J26 (Order Quantity).


Automated Advanced Exit Strategies.


You may want to enter a Position manually and then have an automated Position exit based upon certain technical conditions which can be based upon the price and study data. This is accomplished by using the Spreadsheet System for Trading study. Refer to the Creating a Trading System for Automated Trading instructions on this page to use this study and define your exit conditions. The study will need to be applied to a chart of the same symbol that you are trading.


When you use the Spreadsheet System for Trading study for this purpose, you will not use the Buy Entry and Sell Entry Order Action columns. These columns need to be left blank. Any steps in the instructions associated with them can be skipped. You will only use the Buy Exit and Sell Exit Order Action columns.


Spreadsheet System for Trading study Inputs related to Buy Entry and Sell Entry will not apply for your automated exit strategy.


When either the Buy Exit or Sell Exit Order Action columns become TRUE, an order will be submitted at that time. This can be any of the order types supported by the Spreadsheet System for Trading study. Only when your Exit condition is met, will the order be submitted, not before. Therefore, it is not possible to submit a Stop or Limit order ahead of time and modify it. Therefore, Sierra Chart needs to be running to monitor your current Position and submit the orders. It is possible to use the ACSIL Trading functions and modify an order that has been submitted.


Spreadsheet Study Inputs that are Specific to Systems, Alerts, and Automated Trading.


This section lists Inputs for the Spreadsheet Studies which are specific to the Spreadsheet System for Trading and the Spreadsheet System/Alert studies. These inputs can only be set through the Study Settings window for the Spreadsheet studies.


For the other available Spreadsheet Study Inputs which are set through the Study Settings window, refer to the Spreadsheet Study Inputs page.


A Read-only display of these Study Inputs is displayed on the Spreadsheet Sheet that the chart data is outputted to, in cell columns I and J . It is not possible to modify the value of these Inputs through the Sheet cells. They can only be set through the Study Settings window for the Spreadsheet study.


Reset Condition On New Bar.


If this option is set to Yes , then a System or Alert signal will be given when a new bar is added to the chart and the System/Alert condition is TRUE at row 3 even though the System/Alert condition was previously TRUE on the prior bar/row.


Normally, when a formula returns TRUE or a nonzero value in one of the Spreadsheet columns used for Systems or Alerts and a new bar is added, a new signal will not be given even if it still TRUE. It will have to go back to FALSE and then back to TRUE again, unless Reset Condition On New Bar is set to Yes.


Setting Reset Condition On New Bar to Yes does not in any way change the values returned from the formulas in the Buy/Sell Entry and Exit columns. It only affects the interpretation of the TRUE values returned.


Alert/Signal Only Once per Bar.


If the Alert/Signal Only Once Per Bar option is set to Yes , then an alert or trading signal will be given only once per Formula Column per bar in the chart.


When an alert or trading is given once for a specific Spreadsheet Formula Column, then another will not be given until there is a new bar in the chart and the System/Alert Condition Formula goes back to FALSE and then to TRUE.


This applies to each formula column independently. For example, in the case of the Spreadsheet System for Trading study, if there is a Buy Entry at a particular bar, there can still be a Buy Exit given at the same bar. However, there cannot be 2 Buy Entries on the same bar when this option is enabled.


It is recommended that if you have any trouble obtaining a trading signal when you normally would expect one, that you try setting this option to No .


In the case of the Spreadsheet System for Trading study, when a signal is ignored because of this option, that ignored signal will be logged in the Trade >> Trade Service Log . This is very helpful for troubleshooting purposes. The message is: Signal ignored because 'Signal Only Once Per Bar' is enabled and a signal was already given from formula column for bar.


Allow Multiple Entries In Same Direction.


This input applies only to the Spreadsheet System for Trading study.


Refer to the description on the Auto Trade Management page.


Maximum Position Allowed.


This input applies only to the Spreadsheet System for Trading study.


Refer to the description on the Auto Trade Management page.


Allow Opposite Entry with Opposing Position or Orders.


This input applies only to the Spreadsheet System for Trading study.


Refer to the description on the Auto Trade Management page.


Send Orders To Trade Service.


Refer to the description on the Auto Trade Management page.


This input applies only to the specific instance of the Spreadsheet System for Trading that it is set on. It has no effect on manually entered orders on the chart.


It also only applies to the specific Spreadsheet being used by the Spreadsheet System for Trading study.


Support Reversals.


Refer to the description on the Auto Trade Management page.


Cancel All Orders on Entry and Reversals.


Refer to the description on the Auto Trade Management page.


Signal Only on Bar Close.


The Signal Only on Bar Close Inputs are specific to the Spreadsheet System for Trading study and the Spreadsheet System/Alert study. There are two versions of this input, one for Sheet columns K and M and the other for columns L , N-Z .


When this input is set to Yes , Sheet formulas that return a non-zero (TRUE) value at row 3 in the corresponding formula columns are ignored until the last bar closes. The way this is accomplished is row 4 is monitored instead of row 3.


When this input is set to Yes , then anywhere in the documentation row 3 is mentioned, it is row 4 instead. In the same way that row 3 is continuously monitored for TRUE results from formulas in the corresponding formula columns, row 4 will be continuously monitored when this input is set to Yes.


You may want to set Strict Signal Only On Bar Close Evaluation to Yes, when you set one of these inputs to Yes.


There is one scenario that you should keep in mind about when using Signal Only on Bar Close . Consider you have a formula and one of the Sheet formula columns and it returns TRUE at row 3 (the last bar of the chart) in the column. You refer to the arrow on the chart. A new bar is added, the bar therefore is considered closed, the formula moves down to row 4, it is no longer TRUE and the arrow disappears.


In this case when you are using Signal Only on Bar Close, you will not get a signal.


Strict Signal Only On Bar Close Evaluation.


The Strict Signal Only On Bar Close Evaluation input applies a stricter method of evaluation when you have either of the Signal Only on Bar Close inputs set to Yes. When this input is set to Yes, then only at the moment when a bar closes when one or more new bars are added to the chart, will an evaluation of your Spreadsheet formulas from the corresponding Spreadsheet columns ( K , M , L , N-Z ) be evaluated for TRUE conditions. When this input is set to Yes, row 4 will not be continuously monitored as usual, only exactly at the moment when a bar closes and the chart is updated.


Use Chase Orders.


This input only applies to the Spreadsheet System for Trading study. When this input is set to Yes and you have enabled limit orders for a particular Buy/Sell column, then the limit order will be submitted as a Limit Chase Order. The chase amount is set through the J46 cell labelled Maximum Chase Amount for Limit Chase Orders .


Enhanced Auto Trade Signal Related Logging.


When the Enhanced Auto Trade Signal Related Logging Input is set to Yes , this will add additional messages to the Trade >> Trade Service Log indicating the reason why an order signal is ignored from formula columns K, L, M, N at rows 3 and 4 when using the Spreadsheet System for Trading study.


This is helpful to troubleshoot problems with ignored signals. This should provide a definitive indication as to why signal is getting ignored.


Set this Input to Yes only for a short period of time and only when necessary because it generates a large amount of messages and can create a very heavy and unnecessary CPU load when doing back testing to the point where a tick by tick back test becomes next to impossible to complete and extremely burdensome.


Copy J Column from Formula Source Sheet.


This Input when set to Yes , then this will cause the following rows from column J from the Formula Source Sheet to be copied to the Sheet used by the Spreadsheet System for Trading study.


This includes the cells that support writing or entry by the user. If they are read-only, they are not copied from the Formula Source Sheet .


LIMIT_OR_STOP_PRICE_BUY_ENTRY_ROW LIMIT_OR_STOP_PRICE_BUY_EXIT_ROW LIMIT_OR_STOP_PRICE_SELL_ENTRY_ROW LIMIT_OR_STOP_PRICE_SELL_EXIT_ROW ORDER_QUANTITY_ROW CANCEL_WORKING_ORDERS_ROW DISABLE_AUTO_TRADING_ROW FLATTEN_AND_CANCEL_WORKING_ORDERS_ROW MAXIMUM_CHASE_AMOUNT_FOR_LIMIT_CHASE_ORDERS_ROW BUY_ENTRY_ORDER_TYPE_ROW BUY_EXIT_ORDER_TYPE_ROW SELL_ENTRY_ORDER_TYPE_ROW SELL_EXIT_ORDER_TYPE_ROW CANCEL_ALL_ORDERS_EXCEPT_WORKING_ATTACHED_ORDERS_ROW ATTACHED_ORDER_TARGET_OFFSET_ROW ATTACHED_ORDER_STOP_OFFSET_ROW USE_SEPARATE_EXIT_ORDER_QUANTITY_ROW EXIT_ORDER_QUANTITY_ROW ALLOW_TRADING_ONLY_DURING_TIME_RANGE_ROW START_TIME_FOR_ALLOWED_TIME_RANGE_ROW END_TIME_FOR_ALLOWED_TIME_RANGE_ROW FLATTEN_POSITIONS_AND_CANCEL_ORDERS_AT_SET_TIME_ROW TIME_FOR_FLATTEN_POSITIONS_AND_CANCEL_ORDERS_ROW PF_BOX_SIZE_ROW PF_REVERSAL_SIZE_ROW.


Minimum Chart Bars Required for Entry Exit Cell Evaluation.


This Input when set to Yes , will prevent evaluating the Buy/Sell Entry/Exit cells for order signals until the specified number of bars is in the chart.


BuyEntry (K), BuyExit (L), SellEntry (M), SellExit (N) Spreadsheet Order Action Columns.


The following Spreadsheet Order Action Columns only apply to the Spreadsheet System for Trading study.


Note: For all of the below Order Actions: When an order is submitted, an Alert Sound will also be played if you selected an Alert Sound for the corresponding Spreadsheet column in the Input Settings on the Study Settings window.


An Alert Message will also be added to the Window >> Alerts Manager >> Alerts Log .


Buy Entry (column K)


When the Condition Formula in row 3 of column K on the Spreadsheet returns a nonzero value or TRUE, then a Buy order will be given if certain conditions are met. For complete details about these conditions, refer to the Auto Trade Management page.


The actual order is not submitted until the cell becomes nonzero or TRUE assuming the conditions for sending the order have been met.


Buy Exit (column L)


When the Condition Formula in row 3 of column L on the Spreadsheet returns a nonzero value or TRUE, then a Sell order will be given if certain conditions are met. For complete details about these conditions, refer to the Auto Trade Management page.


You need to code into your Exit formulas by using the AND() Spreadsheet function, a check that there is a Trade Position Quantity. An example would be: =OR(AND($J$8 > 0, ID0.SG4$3 <= $J$9-1), AND($J$8 > 0, ID0.SG4$3 >= $J$9+2)) .


The reference to cell J8 refers to the current Trade Position Quantity . The dollar signs in $J$8 mean it is an absolute Spreadsheet reference.


In the case of a Buy Exit formula, you must to check to make certain there is a long Trade Position by making certain that J8 is > than 0. The purpose of this is so that the formula remains FALSE until such time that a Trade Position can be exited.


Otherwise, the formula could become TRUE on a bar and give a signal even before there is a Trade Position. In this case it will be ignored as it should be. However, if it remains TRUE and then later on that very same bar or a different bar, when there finally is a Trade Position, there will no longer be an Exit signal because the prior TRUE state was already ignored and the formula remains TRUE and not giving a new signal.


The actual order is not submitted until the cell becomes nonzero or TRUE assuming the conditions for sending the order have been met.


Sell Entry (column M)


When the Condition Formula in row 3 of column M on the Spreadsheet returns a nonzero value or TRUE, then a Sell order will be given if certain conditions are met. For complete details about these conditions, refer to the Auto Trade Management page.


The actual order is not submitted until the cell becomes nonzero or TRUE assuming the conditions for sending the order have been met.


Sell Exit (column N)


When the Condition Formula in row 3 of column N on the Spreadsheet returns a nonzero value or TRUE, then a Buy order will be given if certain conditions are met. For complete details about these conditions, refer to the Auto Trade Management page.


You need to code into your Exit formulas by using the AND() Spreadsheet function, a check that there is a Trade Position Quantity. An example would be: =OR(AND($J$8 < 0, ID0.SG4$3 >= $J$9+1), AND($J$8 < 0, ID0.SG4$3 <= $J$9-2)) .


The reference to cell J8 refers to the current Trade Position Quantity . The dollar signs in $J$8 mean it is an absolute Spreadsheet reference.


In the case of a Sell Exit formula, you must to check to make certain there is a short Trade Position by making certain that J8 is < than 0. The purpose of this is so that the formula remains FALSE until such time that a Trade Position can be exited.


Otherwise, the formula could become TRUE on a bar and give a signal even before there is a Trade Position. In this case it will be ignored as it should be. However, if it remains TRUE and then later on that very same bar or a different bar, when there finally is a Trade Position, there will no longer be an Exit signal because the prior TRUE state was already ignored and the formula remains TRUE and not giving a new signal.


The actual order is not submitted until the cell becomes nonzero or TRUE assuming the conditions for sending the order have been met.


Ignored Signals With Spreadsheet Systems or Alerts.


Introdução.


There are many cases in which a Buy or Sell signal from the Entry and Exit formula columns (K, L, M, N) will be ignored. When a signal is ignored from a formula that returns a nonzero number or TRUE, then there will be no Alert Sound played, Alert Message logged, or a Trade Order sent . This section explains all of this.


Enabling Auto Trading.


If Trade >> Auto Trading Enabled - Global or Trade >> Auto Trading Enabled - Chart are unchecked, then Buy and Sell trade order signals from the Spreadsheet System for Trading study will be ignored. In this case you will see messages added to the Trade >> Trade Service Log indicating this.


The Send Orders to Trade Service study Input setting needs to be set consistently with the Trade >> Trade Simulation Mode On setting on the menu. If it is not, then Buy and Sell trade order signals from the Spreadsheet System for Trading study will be ignored. In this case you will see messages added to the Trade >> Trade Service Log indicating this. For complete details, refer to SendOrdersToTradeService.


Ignored Signals During Historical Data Downloading.


With the Spreadsheet System for Trading study and the Spreadsheet System/Alert study, System and Alert signals from the Sheet formula columns are ignored on historical data and when historical data is being downloaded. They are monitored for when the chart is actually updating with new data.


A chart will be updating with new data during real-time chart updating with live data, during replays, or during a Back Test. If you want to see the Back Test results from historical Buy and Sell signals from the Buy/Sell formula columns in the case of when using the Spreadsheet System for Trading study, then refer to the Back Testing section.


Buy/Sell Arrows Do Not Mean Trade Signals.


When using the Spreadsheet System for Trading study and a formula returns TRUE/1 in the Buy Entry (K3), Buy Exit (L3), Sell Entry (M3), or Sell Exit (N3) cells, a trade signal is not necessarily going to be given.


You will see an arrow above or below the chart bar corresponding to the particular formula column cell indicating a buy or sell signal based upon that TRUE/1 value, assuming the corresponding Subgraph Draw Style is set to a visible style. For example, if cell K5 is 1 in the Sheet being used by the Spreadsheet Study and the Buy Entry Subgraph >> Draw Style is set to Arrow Up , then you would see an up arrow displayed below the third chart bar from the last bar in the chart.


However, this does not necessarily mean that the formula TRUE/1 result will be followed and a trade signal will be given. The BuyEntry (K), BuyExit (L), SellEntry (M), SellExit (N) Spreadsheet Order Action Columns rules must be met and the additional conditions imposed by the related study Input Settings must be met, for a trade signal to be actually given. If the trade signal is ignored, then a message will be added to the Trade >> Trade Service Log indicating the reason why.


Review the Trade Service Log for the reason. To see on the chart the actual order fills from trades made, you need to display the order fills. For instructions to do this, refer to Displaying Order Fills.


Reset Condition on New Bar.


When using either the Spreadsheet System for Trading or Spreadsheet System/Alert studies, the TRUE signals given from cells K3 through Z3 may not always be followed and give an alert or trade signal, even though they still return TRUE or a non zero value and an arrow shows on the chart. If a cell is TRUE and there is a new bar added to the chart and the cell continues to be TRUE, because the state is already TRUE, you will not get a new signal unless the input Reset Condition on New Bar is set to Yes.


Signal Only Once per Bar.


If a TRUE signal has been given by the formula in a particular cell and then it goes back to FALSE and back to TRUE on the same bar, you will not get a signal if the study Input Signal Only Once Per Bar is set to Yes .


Signal Only on Bar Close.


If you have the Signal Only On Bar Close (Column K, M) input set to Yes, then a TRUE signal will be ignored on cells K3 and M3, and only the cells K4 and M4 will be monitored for signals. Likewise with the Signal Only On Bar Close (Column L, N-Z) input.


In the case of when either Signal Only Once per Bar and Signal Only on Bar Close study Inputs have been set to Yes , when a signal is ignored by these restrictions, there is no message added to the Trade Service Log or the Alerts Log , except in the case of the Spreadsheet System for Trading study when the signal has been ignored as the result of Signal Only Once Per Bar being set to Yes .


Solução de problemas.


In order to troubleshoot a problem with ignored signals, we recommend setting both of the Signal Only On Bar Close Inputs to No .


Detailed logging can also be enabled which will add reasons for ignored signals in all cases , to the Trade >> Trade Service Log .


When using the Spreadsheet System for Trading study, set the Enhanced Auto Trade Signal Related Logging Input to Yes .


When using the Spreadsheet System/Alert study, set the Enhanced System Signal Related Logging Input to Yes .


Only set these Inputs to Yes when absolutely necessary because they will add a very large number of messages to the Trade Service Log and can cause Sierra Chart to be nonresponsive at times.


System/Alerts and Draw Style.


In the case of the Spreadsheet System/Alert study, if the Draw Style for a Spreadsheet column is set to Ignore , then System or Alert signals in that column will be ignored.


Nonzero Trade Position Quantity.


In the case of the Buy Exit or Sell Exit Order Action columns when using the Spreadsheet System for Trading study, if a Buy/Sell Exit formula is TRUE and remains TRUE before there is a nonzero Trade Position Quantity and then a nonzero Trade Position Quantity later exists, then the Exit will be ignored it until it goes back to FALSE and then to TRUE.


Therefore, you need to program the formula to remain FALSE until there is a Trade Position Quantity. This can be done by using the AND function and checking that cell J5 is nonzero.


Delayed TRUE Result from Formulas.


Another thing to also consider is that you may see an arrow on the chart from one of the Order Action formula column cells indicating TRUE, but it is on the bar prior to the last bar in the chart and it appeared after a new bar was added to the chart. Therefore, unless the corresponding Signal Only On Bar Close Input is set to Yes, then that TRUE result going to be ignored as well.


You cannot make an assumption that when you see a 1/TRUE in a cell, that at the moment the cell is evaluated for an order/alert signal that the 1/TRUE was present at that time. It may have been 0 and could have went to 1 quickly after.


Spreadsheet System for Trading Test Procedure.


To get an understanding of how the TRUE signals in K3, L3, M3, N3 are processed follow the test procedures on the Spreadsheet System for Trading Test Procedure page.


After you go through this test procedure, and you are still having difficulty troubleshooting your Spreadsheet System for Trading study implementation, we recommend changing the formulas to simple TRUE/1 values temporarily during a replay just like explained in the test procedure, and then gradually add to the complexity of them until you can determine the source of the problem.


Disappearing Arrows or Signals.


When using either the Spreadsheet System for Trading study or the Spreadsheet System/Alert study, when a formula in a cell in one of the Spreadsheet columns that is graphed on the chart, typically this is going to be Spreadsheet columns K, L, M, N, returns a nonzero or TRUE value, you will see an arrow on the corresponding bar on the chart representing the TRUE condition.


You also need to make certain that the Draw Style for the particular Spreadsheet formula column you want to see arrows for, is set to one of the Arrow Up/Down/Left/Right Draw Styles or other similar style.


These TRUE formula signals can trigger an Alert Sound as well and also a Trade signal (in the case of the Spreadsheet System for Trading study) if these signals are given in row 3, or row 4 if have set the study Input Signal Only On Bar Close (Columns K, M)/(Columns L, N-Z) to Yes .


If the formula no longer is returning a nonzero or TRUE value and instead returning FALSE (0), then the arrow will disappear even though the Alert and the Trade signal was previously given.


So it is important to understand that your formula could go to TRUE momentarily and then FALSE.


In summary, the standard Up and Down arrows on a chart displayed by these Spreadsheet studies, indicate the present state of the formulas. During the formation of a bar or after new bars are added to the chart, a formula could go from TRUE to FALSE based upon the logic of the formula and changing data in the cells that it references. It is up to you to determine specifically what is happening and why.


To actually see where the trades were made, you need to display Order Fills on the chart.


If you are using the Spreadsheet System for Trading study and you wish to visibly see where trades have been made on the chart in the case of when the arrows on the chart disappear, then enable Trade >> Show Order Fills . Various options affecting the display of order fills can be set by enabling Trade >> Chart Trade Settings on the menu.


When a cell that can trigger an Alert Sound or Trade signal becomes TRUE and an Alert Sound and/or a Trade signal is actually given, then an alert message will be added to the Window >> Show/Hide Alerts Manager >> Alerts Log . All of these events are logged in the Alerts Log tab.


Not only can you experience the condition where the arrows disappear, you could also have the condition where the state of your formulas change, based upon how they are programmed and the data they are referencing, and you see an arrow later appear on a bar where a signal was not previously given when it was evaluated for an alert or trade signal.


You may also see that the arrow direction does not correspond to an order fill displayed on a bar due to changes with the formula results during processing of a bar. For example, initially a bar may have given a Buy signal, a Buy fill is displayed on the chart for the bar, but then later the bar gives a Sell signal which is ignored based upon the auto trade logic. So at the present moment you see a Down Arrow, but a Buy fill for the bar.


In order to create more stability when it comes to generating orders when using the Spreadsheet System for Trading study, you may want to set the Signal Only On Bar Close (Columns K, M) / (Columns L, N-Z) input to Yes.


All of what is described in this section is something that you need to be aware of when you are looking at the final results of your trading system and comparing them to the current FALSE/TRUE state of the Spreadsheet formulas that you visually see at the present moment.


The Effect of the Number of Rows Input.


The Number of Rows input with the Spreadsheet studies, affects the standard Up and Down arrows displayed on a chart by the Spreadsheet studies. You will need to increase this input value to see arrows going back more bars. Arrows that were placed on bars further back than the Number of Rows Input during real-time updating and chart replays, can disappear, or if they have not been removed because there has not been a full recalculation of the study, they may no longer be valid.


Special Spreadsheet Outputted Values.


The Spreadsheet studies will output additional values in the I and J Spreadsheet columns for information and calculation purposes. This is in addition to the main price graph data outputted to columns A through G and the study data outputted beginning at column AA.


The following is a list of all the additional values that are outputted.


Special Spreadsheet System for Trading Values.


These values are outputted for the Spreadsheet System for Trading study only. These values can be used in Spreadsheet formulas. Below is a description of what each Row means.


Working Orders Quantity [J3]


This is the combined quantity for all the Working orders for the chart symbol. This is positive for Buy orders and negative for Sell orders. If there is one Buy working order with a quantity of 5, it will be +5. If there is one Buy order and one Sell order, each with the same quantity, it will be 0.


Position with Working Orders Quantity [J4]


This is the Position quantity combined with the quantities from Working orders. BuyEntry and SellEntry depend on this number to determine whether or not another entry should be allowed. For more information, refer to Trade Positions.


Position Quantity [J5 or J8]


Cells J5 and J8 contain the Quantity of the current Trade Position for the chart symbol.


This Quantity can either be a quantity from the Trade Simulation Mode system or the quantity from the external trading service.


This depends upon whether the Spreadsheet System for Trading study is in Simulation Mode or not. For instructions to control this, refer to Going From Simulated Trading to Non-Simulated (Live) Trading.


This value can be negative (a Short quantity) or positive (a Long quantity). Both of these cells, J5 or J8, contain the same Position data and either one can be used.


In the case of a Trade Position Quantity when in Trade Simulation Mode, for information about how that is determined, refer to Simulated Trade Positions.


For information about non-simulated Trade Positions, refer to Trade Positions Tab.


Position with Working Exit Orders Quantity [J6]


This is the Position quantity for the symbol combined with the quantity of working orders that can potentially exit the current Position. Therefore, if the Position quantity is +5 and there is a Sell order with a quantity of 4, this will be 1. For more information, refer to Trade Positions.


Prior Position Quantity [J7]


The Prior Position Quantity cell indicates the Position Quantity right before a new order fill is processed. If a trade order fills with multiple fills, then this field will be updated for each of those fills.


Prior Position Quantity is calculated using the available order fill data in the Trade >> Trade Activity Log >> Trade Activity tab for the symbol. The Global Settings >> General Trade Settings >> Number of Days to Save in Trade Activity Log controls how many days of data are saved in the log. You may need to adjust that to meet your requirements.


Position Average Price [J9]


This is the average of the fill prices of the currently open Trade Position for the Symbol and Trade Account the chart is set to.


For more information, refer to Trade Positions.


Open Profit/Loss [J10]


This is the profit or loss of the currently open Trade Position for the Symbol and Trade Account the chart is set to.


For more information, refer to Trade Positions.


This value is outputted as a Currency Value. Refer to Profit/Loss Format for the calculation method for Currency Value .


Cumulative Closed Profit/Loss [J11]


This is the profit or loss of the closed out Trades for the Symbol and Trade Account of the chart the Spreadsheet System for Trading study applied to. It is based upon the available order fill data in Trade >> Trade Activity Log >> Trade Activity .


This value is outputted as a Currency Value. Refer to Profit/Loss Format for the calculation method for Currency Value .


If the order fills from Trades made, are not available in the Trade Activity Log, then the Cumulative Closed Profit/Loss value will not consider those trades. The number of days saved in the Trade Activity Log is set through Global Settings >> General Trade Settings .


To reset this value, you will need to clear the order fill data from the Trade Activity Log for the Symbol and Trade Account. For instructions to do this, refer to Clearing Trade Activity Log.


The order fill data for replays and back tests, when you initiate a replay or back test will be automatically cleared. At that time you will receive a prompt to clear this data. When you press Yes, the data will be automatically cleared and therefore the Cumulative Closed Profit/Loss will be reset back to 0.


Maximum Open Position Profit [J31]


The Maximum Open Position Profit is what the maximum profit of the current Position has been. This is reset whenever the Position Quantity changes. For more information, refer to Trade Positions.


Maximum Open Position Loss [J32]


The Maximum Open Position Loss is what the maximum loss of the current Position has been. This is reset whenever the Position Quantity changes. For more information, refer to Trade Positions.


Win Trades [J33]


The total number of winning trades based upon the available fill data in Trade >> Trade Activity Log >> Trade Activity . A winning trade is defined as a trade that reduces or closes out a Position while the Open Profit/Loss is positive or flat.


The number of days saved in the Trade Activity Log is set through Global Settings >> General Trade Settings .


Lose Trades [J34]


The total number of losing trades based upon the available fill data in Trade >> Trade Activity Log >> Trade Activity . A losing trade is defined as a trade that reduces or closes out a Position while the Open Profit/Loss is negative.


The number of days saved in the Trade Activity Log is set through Global Settings >> General Trade Settings .


Total Trades [J35]


The total number of closed trades based upon the available fill data in Trade >> Trade Activity Log >> Trade Activity . A trade is defined as a trade that reduces or closes out a Position. This is going to be an individual fill. Not necessarily an entire order.


The number of days saved in the Trade Activity Log is set through Global Settings >> General Trade Settings .


Seconds Per Bar - Intraday (read-only) [J36]


This cell contains the number of seconds that the chart bars are set to ( Chart>> Chart Settings ). This will always be a nonzero number. Even when one of the Number of Trades Per Bar, Volume Per Bar, Range Per Bar cells are nonzero.


Number of Trades Per Bar - Intraday (read-only) [J37]


The cell contains the number of trades per bar setting in Chart>> Chart Settings . It will be zero if the chart bars are not set to be based upon a number of trades.


Volume Per Bar - Intraday (read-only) [J38]


The cell contains the volume per bar setting in Chart>> Chart Settings . It will be zero if the chart bars are not set to be based upon a specified volume.


Range Per Bar (in ticks) - Intraday (read-only) [J39]


The cell contains the range per bar setting in Chart>> Chart Settings . It will be zero if the chart bars are not set to be based upon a specified price range.


Symbol [J40]


The cell contains the symbol of the chart. In the case where a Trade and Current Quote Symbol is set on the chart, that symbol will be returned.


Last Bar End DateTime [J41]


This cell contains the latest date and time of the last bar in the chart in a Serial DateTime format.


This number can be used for various comparisons within formulas that are based on times. To ensure you see this value formatted as a Date-Time, right-click on the cell and select Number Format from the menu or Spreadsheet >> Number Format . Change the Number Format to Date-Time .


This cell data is outputted with all of the Spreadsheet studies.


Last Entry Trade Date-Time [J42]


This cell displays a number that represents the Date and Time of the bar at which the last Entry trade was triggered and processed. This number can be used for various comparisons within formulas that are based on times.


This data is maintained by the internal Trades list in the chart.


Last Exit Trade Date-Time [J43]


This cell displays a number that represents the Date and Time of the bar at which the last Exit trade was triggered and processed. This number can be used for various comparisons within formulas that are based on times.


This data is maintained by the internal Trades list in the chart.


Last Trade Profit/Loss [J44]


This is the Profit or Loss of the last completed trade for the Symbol and Trade Account of the chart the Spreadsheet System for Trading study applied to.


This uses a Fill to Fill order fill grouping method for Trades.


This is calculated from the order fill data in Trade >> Trade Activity Log >> Trade Activity . The number of days saved in the Trade Activity Log is set through Global Settings >> General Trade Settings .


Closed Daily Profit/Loss [J45]


This is the Profit or Loss of Trades made that have been closed during the day for the Symbol and Trade Account of the chart the Spreadsheet System for Trading study applied to. This uses a Fill to Fill order fill grouping method for Trades.


This is calculated from the order fill data in Trade >> Trade Activity Log >> Trade Activity . The number of days saved in the Trade Activity Log is set through Global Settings >> General Trade Settings .


By default it resets at midnight according to the Time Zone setting in Sierra Chart. The reset time can be changed through Global Settings >> General Trade Settings >> Daily Stats Reset Time .


Trade Service Account Balance [J47]


This is the current cash balance for the selected Trade Account on the Trade Window for the chart when not in Trade Simulation Mode.


This data is from the external connected Trading service. Not all Trading services provide this data. This is not a simulated account balance.


To select the Trade Account on the Trade Window for the chart, refer to Selecting Trade Account.


Last Entry Fill Price [J48]


This cell displays the fill price of the order for the last Entry trade. If your trading system is in simulation mode, then this data is from a simulated order. Otherwise, it is from a non-simulated order.


This data is maintained by the internal Trades list in the chart.


Last Exit Fill Price [J49]


This cell displays the fill price of the order for the last Exit trade. If your trading system is in simulation mode, then this data is from a simulated order. Otherwise, it is from a non-simulated order.


This data is maintained by the internal Trades list in the chart.


Daily Win Trades [J50]


This the number of trades that have completed and had a profit or were breakeven during the trading day. This uses a Fill to Fill order fill grouping method for Trades.


This is calculated from the order fill data in Trade >> Trade Activity Log >> Trade Activity . The number of days saved in the Trade Activity Log is set through Global Settings >> General Trade Settings .


By default this field reset at midnight according to the Time Zone setting in Sierra Chart. The reset time can be changed through Global Settings >> General Trade Settings >> Daily Stats Reset Time .


Daily Lose Trades [J51]


This the number of trades that have completed and had a loss during the trading day. This uses a Fill to Fill order fill grouping method for Trades.


This is calculated from the order fill data in Trade >> Trade Activity Log >> Trade Activity . The number of days saved in the Trade Activity Log is set through Global Settings >> General Trade Settings .


By default this field resets at midnight according to the Time Zone setting in Sierra Chart. The reset time can be changed through Global Settings >> General Trade Settings >> Daily Stats Reset Time .


Daily Total Trades [J52]


This the number of Trades that have completed during the trading day. This uses a Fill to Fill order fill grouping method for Trades.


This is calculated from the order fill data in Trade >> Trade Activity Log >> Trade Activity . The number of days saved in the Trade Activity Log is set through Global Settings >> General Trade Settings .


By default this field resets at midnight according to the Time Zone setting in Sierra Chart. The reset time can be changed through Global Settings >> General Trade Settings >> Daily Stats Reset Time .


This field can be used to limit the number of automated trades during the trading day. For example, in the Disable Auto Trading (J28) cell, enter the following: =J52 >= 1 . This will limit your automated trading to 1 trade per day.


Daily Total Quantity Filled [J53]


This is the total quantity of the order fill quantities for the trading day. For example, if you have a buy order fill during the trading day of quantity 5 and a sell order fill of quantity 5, then this will be 10, assuming these are the only 2 fills during the trading day.


This is calculated from the order fill data in Trade >> Trade Activity Log >> Trade Activity . The number of days saved in the Trade Activity Log is set through Global Settings >> General Trade Settings .


By default this field resets at midnight according to the Time Zone setting in Sierra Chart. The reset time can be changed through Global Settings >> General Trade Settings >> Daily Stats Reset Time .


Daily Number of Long Trades [J54]


This the number of Long Trades that have completed during the trading day. This uses a Fill to Fill order fill grouping method for Trades.


This is calculated from the order fill data in Trade >> Trade Activity Log >> Trade Activity . The number of days saved in the Trade Activity Log is set through Global Settings >> General Trade Settings .


By default this field resets at midnight according to the Time Zone setting in Sierra Chart. The reset time can be changed through Global Settings >> General Trade Settings >> Daily Stats Reset Time .


Daily Number of Short Trades [J55]


This the number of Short Trades that have completed during the trading day. This uses a Fill to Fill order fill grouping method for Trades.


This is calculated from the order fill data in Trade >> Trade Activity Log >> Trade Activity . The number of days saved in the Trade Activity Log is set through Global Settings >> General Trade Settings .


By default this field resets at midnight according to the Time Zone setting in Sierra Chart. The reset time can be changed through Global Settings >> General Trade Settings >> Daily Stats Reset Time .


Current Quote Values [Cells J12 through J20]


Cells J12 through J20 display the Current Quote Values for the chart symbol. These are always displayed on the Spreadsheet used by the Spreadsheet System for Trading study, and will only be displayed if the Output Current Quote Data input is set to Yes for the other Spreadsheet studies.


The Daily Open, Daily High, Daily Low, Daily Net (Daily Price Change), and Daily Volume are only going to be set when connected to the data feed ( File >> Connect to Data Feed ) and the associated chart is not replaying. Otherwise, they will be 0. The data that you see is the same data displayed in Window >> Current Quote Window . The Current Quote Window contains the daily quote data for the symbol of the active chart.


Tick Size (Read-only) [J21]


This cell contains the Tick Size of the symbol. This is the minimum increment that the symbol trades in. This data is outputted for all of the Spreadsheet studies.


The Tick Size is useful to use in formulas where you want to specify a number of ticks as an actual price value. For example =4 * J21 .


Special Spreadsheet Trading Inputs on the Spreadsheet.


The following is a list of special Spreadsheet inputs in columns I and J used by the Spreadsheet System for Trading study. These are actual inputs that will use the values you type into the corresponding row in the J column.


Limit or Stop Prices [J22, J23, J24, J25]


Cells J22 through J25 allow you to set the Limit or Stop order prices for each of the 4 different Spreadsheet Order Actions. These apply when you have set to use a Limit or Stop order for a particular Order Action in cells J71 through J74. Refer to Buy Entry: Order Type [J71].


You are able to set a Limit or Stop price to either the Bid or Ask prices by using these formulas: =J12 (Bid price) or =J14 (Ask Price). This allows you to buy at the Bid or sell at the Ask respectively.


You can use the Tick Size in cell J21 to use in these Limit or Stop Price cell formulas to specify a certain number of ticks as an actual price value. For example = E3 + 4 * J21 .


Order Quantity [J26]


Cell J26 controls the Order Quantity for orders that are submitted from the Spreadsheet System for Trading study. This quantity can be dynamically controlled by a formula.


If the cell is empty or 0, the Order Quantity will be set to 1 for Buy Entry and Sell Entry .


If the cell is empty or 0 during a Buy Exit or Sell Exit , then the quantity is determined by the automated trading logic and the end result will be that the Trade Position for the Symbol and Trade Account is flattened.


Negative order quantities are converted to positive numbers.


Use Separate Exit Order Quantity [J82]


When this cell is set to TRUE or a nonzero value, then a Buy Exit or Sell Exit Order Action will use the quantity specified by the Exit Order Quantity [J83] cell.


Exit Order Quantity [J83]


This cell is only used when Use Separate Exit Order Quantity [J82] is set to TRUE or a nonzero value.


This cell controls the Order Quantity for Buy Exit or Sell Exit Order Actions from the Spreadsheet System for Trading study. This quantity can be dynamically controlled by a formula.


If the cell is empty or 0 during a Buy Exit or Sell Exit , then the quantity is determined by the automated trading logic and the end result is that the Trade Position for the Symbol and Trade Account the automated trading system is for will be flattened.


Negative order quantities are converted to positive numbers.


Maximum Chase Amount for Limit Chase Orders [J46]


This cell is used to specify the maximum chase amount for limit chase orders. For more information, refer to the Use Chase Orders input.


Cancel Working Orders [J27]


Cell J27 allows you to cancel all working orders for the Symbol and Trade Account of the chart that the Spreadsheet System for Trading study is currently applied to.


Setting this cell to TRUE or any non-zero number (such as 1 ) will trigger the canceling of orders. You can also input a formula into this cell to cancel all working orders when certain conditions are met.


The canceling of orders occurs before any of the Entry and Exit signal cells are evaluated. However, these cancellations in the case of non-simulated trading do take time to occur and they will be pending during the evaluation of the Entry and Exit signal cells.


When this cell is set to a nonzero or TRUE value, additional cancellations will not occur until it is set back to zero or FALSE and then back to a nonzero or TRUE value.


If you wish to cancel working orders at a specific time, then you can use a formula like this: =(J41-INT(J41)) > TIMEVALUE("16:15:00") . This example will return TRUE when the time is 16:15 or greater. Cell J41 is the latest time in the last bar in the chart. It is best to use that cell, since NOW() always refers to the current time, and that will not work during back testing.


Cancel All Orders except working Attached Orders [J78]


Cell J78 allows you to cancel all working orders except for working Attached Orders for the Symbol and Trade Account of the chart that the Spreadsheet System for Trading study is currently applied to.


Attached Orders that have a Pending Child - Client/Server status will still be canceled. Only Attached Orders that have an Open/Pending Open/Pending Modify status will not be canceled.


Setting this cell to TRUE or any non-zero number (such as 1 ) will trigger the canceling of orders. You can also input a formula into this cell to cancel all working orders when certain conditions are met.


The canceling of orders occurs before any of the Entry and Exit signal cells are evaluated. However, these cancellations in the case of non-simulated trading do take time to occur and they will be pending during the evaluation of the Entry and Exit signal cells.


When this cell is set to a nonzero or TRUE value, additional cancellations will not occur until it is set back to zero or FALSE and then back to a nonzero or TRUE value.


Flatten Position and Cancel Working Orders [J29]


Cell J29 flattens the existing Trade Position that the Spreadsheet System for Trading study is reporting on the Sheet. So this will be for the Symbol and Trade Account that the chart is set to.


All Working orders will also be canceled for the symbol and Trade Account.


Simply setting this cell to TRUE or any non-zero number (such as 1 ) will trigger the flattening of the Position and canceling of orders. You can also input a formula here to perform the action when certain conditions are met.


The flattening of the Position and canceling of orders occurs before any of the Entry and Exit signal cells are evaluated. When this cell is set to a nonzero or TRUE value, additional flattening of the Position and canceling of orders will not occur until it is set back to zero or FALSE and then back to a nonzero or TRUE value.


If you want to flatten the Trade Position and cancel working orders at a specific time, then you can use a formula like this: =(J41-INT(J41)) > TIMEVALUE("16:15:00") . This example will return TRUE when the time is 16:15 or greater. Cell J41 is the latest time in the last bar in the chart. It is best to use that cell, since NOW() always refers to the current time, and that will not work during back testing.


Disable Auto Trading [J28]


When Cell J28 is set to TRUE it disables all trading from the Spreadsheet. When this cell is set to TRUE , all Spreadsheet Buy/Sell entries and exits, flatten Position and cancel order commands are ignored .


However, if this cell is set to TRUE at the same time that a cell like Flatten Position and Cancel Working Orders is set to TRUE, then the Flatten Position and Cancel Working Orders action will still occur and then automated trading will be disabled after that. This paragraph applies to versions 1463 and higher.


You can enter a formula in this cell to disable trading when certain conditions are met or even when the latest Date-Time of the last bar in the chart meets some specified time condition. Manually setting this input to TRUE or any non-zero number will simply disable all auto trading until the cell is set back to FALSE .


If you want to disable automated trading at a specific time, then you can use a formula like this: =(J41-INT(J41)) > TIMEVALUE("16:15:00") . This example returns TRUE when the time is 16:15 or greater. Cell J41 is the latest time in the last bar in the chart. It is best to use that cell, since NOW() always refers to the current time, and that will not work during back testing.


For documentation for the particular Spreadsheet functions used, refer to Spreadsheet Functions.


To limit trading to the day session only, use this formula: =OR(J41-INT(J41) < TIMEVALUE("09:30:00"), J41-INT(J41) > TIMEVALUE("16:00:00") ) . This formula assumes your time zone in Sierra Chart is set to New York, and the symbol of the chart is a stock or stock index.


Buy Entry: Order Type [J71]


This Spreadsheet input is for specifying the order type for the Buy Entry Order Action column.


The corresponding Limit or Stop price is set in cell J22. If the Limit or Stop price cell is set to 0 or is blank, then the Limit or Stop price will be set to the current Ask price.


If the Order Type is blank, it will be set to M (Market).


The order type can be programmatically set with a formula. Here is an example: =IF($J$5 > 0, "L", "M") .


Buy Exit: Order Type [J72]


This Spreadsheet input is for specifying the order type for the Buy Exit Order Action column.


The corresponding Limit or Stop price is set in cell J23. If the Limit or Stop price cell is set to 0 or is blank, then the Limit or Stop price will be set to the current Bid price.


If the Order Type is blank, it will be set to M (Market).


The order type can be programmatically set with a formula. Here is an example: =IF($J$5 > 0, "L", "M") .


Sell Entry: Order Type [J73]


This Spreadsheet input is for specifying the order type for the Sell Entry Order Action column.


The corresponding Limit or Stop price is set in cell J24. If the Limit or Stop price cell is set to 0 or is blank, then the Limit or Stop price will be set to the current Bid price.


If the Order Type is blank, it will be set to M (Market).


The order type can be programmatically set with a formula. Here is an example: =IF($J$5 > 0, "L", "M") .


Sell Exit: Order Type [J74]


This Spreadsheet input is for specifying the order type for the Sell Exit Order Action column.


The corresponding Limit or Stop price is set in cell J25. If the Limit or Stop price cell is set to 0 or is blank, then the Limit or Stop price will be set to the current Ask price.


If the Order Type is blank, it will be set to M (Market).


The order type can be programmatically set with a formula. Here is an example: =IF($J$5 > 0, "L", "M") .


Attached Order Target Offset (write only) [J80]


When this is set to a nonzero value, this will replace any existing defined Attached Orders on the Trade Window for the chart with a Target Limit order with the Offset specified in this cell.


The purpose of using a Spreadsheet cell to set the Target Attached Order Offset is so that it can be set according to a formula rather than hardcoded at a particular value on the Trade Window for the chart.


The Offset is relative to the parent order price. This Offset needs to be specified as an actual price value .


If a Stop order is also set through cell J81 , then this will be added to the Attached Orders at the same time as well. For more information, refer to Attached Orders.


For the Attached Orders to actually be used when submitting a Buy/Sell Entry order, the Use Attached Orders option needs to be enabled on the Trade Window for the chart.


Attached Order Stop Offset (write only) [J81]


When this is set to a nonzero value, this will replace any existing defined Attached Orders on the Trade Window for the chart with a Stop order with the Offset specified in this cell.


The purpose of using a Spreadsheet cell to set the Stop Attached Order Offset is so that it can be set according to a formula rather than hardcoded at a particular value on the Trade Window for the chart.


The Offset is relative to the parent order price. This Offset needs to be specified as an actual price value .


If a Target order is also set through cell J80 , then this will be added to the Attached Orders at the same time as well. For more information, refer to Attached Orders.


For the Attached Orders to actually be used when submitting a Buy/Sell Entry order, the Use Attached Orders option needs to be enabled on the Trade Window for the chart.


Working Orders Exist (read-only) [J84]


This is set to TRUE when there are orders which currently have a Status indicating they are working and can be filled. This also includes Pending Child orders. Otherwise, this is set to FALSE. This cell is read-only.


Allow Trading Only During Time Range (read/write) [J85]


This can be set to TRUE to only allow automated trading by the Spreadsheet System for Trading study during the time range specified in the Start Time For Allowed Time Range and End Time For Allowed Time Range cells.


The current time used in the comparison is the Date-Time of the most recent trade/quote in the last bar in the chart. This either can be accurate to the second and based upon the most recent trade date-time for the symbol from the data feed, or will be based upon the Intraday chart data file record in the case of an Intraday chart and will also be accurate to the second in the case of 1 Tick or 1 Second Intraday data.


Start Time For Allowed Time Range (read/write) [J86]


When the Allow Trading Only During Time Range cell has been set to TRUE, then this cell specifies the starting time in the charts time zone that automated trading is allowed to begin at.


This time can be entered in the format: HH:MM:SS or using a formula that returns a Serial DateTime Value.


End Time For Allowed Time Range (read/write) [J87]


When the Allow Trading Only During Time Range cell has been set to TRUE, then this cell specifies the ending time in the charts time zone that automated trading will no longer be allowed after.


This time can be entered in the format: HH:MM:SS or using a formula that returns a Serial DateTime Value.


Flatten Positions And Cancel Orders At Set Time (read/write) [J88]


When this cell is set to TRUE, then the current Trade Position will be flattened and any working Orders will be canceled for the Symbol and Trade Account of the chart the Spreadsheet System for Trading study is applied to, at the time specified by the Time For Flatten Positions And Cancel Orders cell.


This cell will not perform a Flatten Positions or Cancel Orders operation when the Disable Auto Trading cell is true, or when using Allow Trading Only During Time Range and the current time based on the current chart bar time is outside of the specified time range.


Time For Flatten Positions And Cancel Orders (read/write) [J89]


When the Flatten Positions And Cancel Orders At Set Time cell is set to TRUE, then this cell specifies the time to flatten the Trade Position and cancel the Orders at.


This cell will not perform a Flatten Positions or Cancel Orders operation when the Disable Auto Trading cell is true, or when using Allow Trading Only During Time Range and the current time based on the current chart bar time is outside of the specified time range.


Last Entry/Exit Order Date-Time (read-only) [J90]


This is the Date-Time in the charts time zone, of the last entry or exit order which was submitted whether it has filled or not.


This is useful to use in formulas to determine the amount of time elapsed since an order was submitted and it has not yet filled.


Back Testing.


Spreadsheet Calculations and Spreadsheet Study Processing of Spreadsheet Data.


This section describes the calculations of formulas on a Sheet in a Spreadsheet window and the subsequent reading and processing of values and formula results from a particular Sheet being referenced by one of the Spreadsheet studies. There is a difference between these two operations and this needs to be understood.


The general method by which a Spreadsheet study interacts with a particular Sheet in a Spreadsheet window (also known as a Sheet Collection), is that first the chart data and study values are outputted to the Sheet, the Sheet is calculated, and then the Spreadsheet study gets the results from the formula columns K through Z (last formula column by default) and processes those results and puts them into internal chart arrays for graphing on the chart.


In the case of the Spreadsheet System for Trading study, if there is a full recalculation of the chart, the Sheet will be updated and calculated, however there will not be processing of any of the Sheet formula columns during that full recalculation, by the Spreadsheet System for Trading study. A full recalculation will occur when the chart is opened as part of its Chartbook opening, studies are modified through the Chart Studies window, or if the chart has been tagged for a full recalculation by a chart it is referencing. This last case is not a common case.


After a full recalculation occurs, it is normal for the last bar in the chart to be calculated again. At this time it is normal for any of the Spreadsheet studies to process the formula columns for the last bar in the Sheet.


In the case of the Spreadsheet System for Trading study, if 100 or more bars are added at once to the chart when the chart is updated, then there will not be processing of the Sheet formula columns. This kind of event will be indicated in the Trade >> Trade Service Log when it happens.


The below sections explain how the K through Z formula columns that contain formula results are processed based on the Signal Only on Bar Close inputs. There are two of these inputs and this section applies to both of them. For example, if you use the Signal Only on Bar Close (Columns K, M) input, then this description would apply to columns K and M .


The time at which formula results are processed by any of the Spreadsheet studies is after all the Sheets within the Spreadsheet have been calculated and all cells are reporting their current values.


If Signal Only on Bar Close is set to No , then the following occurs:


If there are no new bars added to the chart during a chart update, then only Sheet row 3 is checked for TRUE/FALSE values that are returned by formulas in the Spreadsheet signal columns (K-Z).


If there are new bars added to the chart during a chart update, then the first row in the Sheet that is examined for TRUE/FALSE values that are returned by the formulas, is the previous topmost row during the prior update (the data previously at row 3).


The reason the previous topmost row is examined, is because there could be changes with the price data and studies at that row during the chart update. In other words, the examination continues where it left off.


Next, the Spreadsheet study processing function moves up the rows all the way up to 3, examining for TRUE/FALSE conditions row by row. For example, if there is one new bar added, then first row 4 is examined and then row 3 is examined for TRUE/FALSE conditions.


One potential issue to be aware of with this processing logic is that if a formula in a particular column is TRUE at row 3 and then a new bar is added and it becomes FALSE at row 4, then the internal state maintained by Sierra Chart for the Spreadsheet column goes to FALSE and can then go back to TRUE if the formula is TRUE at row 3 during that update.


The potential issue with this is an unexpected signal due to a state change.


If Signal Only on Bar Close is set to Yes , then the following occurs:


If there are no new bars added to the chart during a chart update, then only Sheet row 4 is checked for TRUE/FALSE values that are returned by formulas in the Spreadsheet signal columns (K-Z).


If there are new bars added to the chart during a chart update, then the first row in the Sheet that is examined for TRUE/FALSE values that are returned by the formulas, is the previous second topmost row during the prior update (the data previously at row 4).


The reason the previous second topmost row is examined, is because there could be changes with the price data and studies at that row during the chart update. Although, usually not in this case since the data was previously at row 4. In other words, the examination continues where it left off.


Next, the Spreadsheet study processing function moves up the rows all the way up to 4, examining for TRUE/FALSE conditions row by row. For example, if there is one new bar added, then first row 5 is examined and then row 4 is examined for TRUE/FALSE conditions.


One potential issue to be aware of with this processing logic is that if a formula in a particular column is TRUE at row 4 and then a new bar is added and it becomes FALSE at row 5, then the internal state maintained by Sierra Chart for the Spreadsheet column goes to FALSE and can then go back to TRUE if the formula is TRUE at row 4 during that update.


The potential issue with this is an unexpected signal due to a state change. Although, this kind of scenario is highly unlikely with Signal Only on Bar Close set to Yes because data other than at the last bar in the chart is not likely to change.


Order of Formula Column Processing and Internal Calculation Order.


When the formula results in columns K through Z (last formula column by default) are processed for Trade Order or Alert signals by the Spreadsheet System for Trading or Spreadsheet System/Alert studies, column K is evaluated first, then L, then M, and so on through and including the last formula column (by default column Z). The last formula column is set by the Number of Formula Columns Input.


Therefore in the case of the Spreadsheet System for Trading study, the following columns are evaluated in the order in which they are listed left to right: Buy Entry, Buy Exit, Sell Entry, Sell Exit .


The order of calculation for the formulas in cells within a Spreadsheet is based upon the dependency they have to each other. A cell dependent on another cell is always going to be calculated after the cell it is dependent on.


In the case where 2 cells refer to each other, this is known as a circular reference. In the version of Sierra Chart with New Spreadsheets, there is no special handling of a circular reference, the result can be unpredictable, and an error may be given. Circular references are not supported as they simply make no mathematical sense and have an absolute impossibility to resolve accurately.


Multiple Exit Automated Trading Example.


This is an example of an automated trading exit which utilizes two targets. This example applies to the Spreadsheet System for Trading study. A stop is not used in this example. There are three formulas involved in this strategy and they are used in the following cells: Buy Exit, Sell Exit, and Custom Order Quantity.


In this example, these formulas set a price target of 3 points and 5 points away from the Position Average Price (Cell J9). It is assumed that there is a Position quantity of 5.


For the first target, two contracts will be exited. For the second target, three contracts will be exited.


Order Quantity Formula (Cell J26): =IF( ABS(J8) = 5, 2, IF( ABS(J8) = 3, 3, 0)) .


Buy Exit Formula (Cell L3): =OR( AND( $J$8 = 5, ID0.SG4$3 - $J$9 > 3), AND( $J$8 = 3, ID0.SG4$3 - $J$9 > 5))


Sell Exit Formula (Cell N3): =OR( AND( $J$8 = -5, $J$9 - ID0.SG4$3 > 3), AND( $J$8 = -3, $J$9-ID0.SG4$3 > 5))


This is merely a simple example and this will need to be tested and modified to be certain it will work for you.


Limiting Trading to Certain Time Ranges.


This section uses the GETTIMEFROMDATETIMEVALUE function which is going to be available in an upcoming release at the time of this writing.


To restrict trading during only a certain time range, you can use the Disable Auto Trading cell. Here is an example formula to limit trading during a specific time range: =AND((GETTIMEFROMDATETIMEVALUE(J41)) > TIME(9, 30, 0), GETTIMEFROMDATETIMEVALUE(J41) < TIME(16, 15, 0)) . J41 contains the Last Bar End DateTime.


Or this formula could be combined into a Buy Entry and Sell Entry formula by using the AND function.

No comments:

Post a Comment